Add 4x SATA drives to a desktop via a single 2280 M.2 drive slot; Maintain SATA 6Gbps read/write speeds per drive - Drivers auto-install in Windows 8 and up/macOS/Linux; Supports software storage management (Storage Spaces) - Use with computers/external enclosures that have an M.2 slot to cost-effectively expand storage capabilities - Supports TRIM and SMART data; SATA I/II/III and PCIe 3.0; Includes 4x SATA cables - Works in PCIe-based B or M-key M.2 slots; Not compatible with SATA M.2 slots.
TAA-Compliant Gigabit Network Card with Realtek RTL8111H chip adds a 1Gbps ethernet interface to a desktop/server; Features link speed/activity LED indicators - 10/100/1000Mbps Network Adapter Card supports 9K jumbo frames/Wake-on-LAN (WoL)/VLANs for efficient network management - PCI Express NIC features pre-installed low-profile bracket with full-profile bracket included - Works with Windows/Windows Server/Linux and Intel/AMD hardware platforms that have a PCIe x1/x4/x8/x16 slot.
TAA-Compliant Gigabit Network Card with Realtek RTL8111H chip adds a 1Gbps ethernet interface to a desktop/server; Features link speed/activity LED indicators - 10/100/1000Mbps Network Adapter Card supports 9K jumbo frames/Wake-on-LAN (WoL)/VLANs for efficient network management - PCI Express NIC features pre-installed full-profile bracket with low-profile bracket included - Works with Windows/Windows Server/Linux and Intel/AMD hardware platforms that have a PCIe x1/x4/x8/x16 slot.
Add a DB9 RS-232 serial port to a desktop / laptop using a USB-A port - DB9 screws pre-installed; DB9 Nuts included for device/cable compatibility - Rugged TPE housing and level-4 ESD protection; Copper shielding; Gold plated connectors; Operating temp. -40 C to 80 C - Transmit/Receive LED indicators for port activity; USB LED for when the adapter has successfully enumerated on the desktop - Works w/Windows/macOS/Linux; Max Baud 115.2Kbps; 128 Byte RX and 256 Byte TX FIFO; FTDI FT232R Chipset.
ASUS ThunderboltEX 4 with Intel Thunderbolt 4 JHL 8540 controller, 2 USB Type-C ports with USB 4 support, up to 40Gb/s bi-directional bandwidth and incorporates DisplayPort 1.4 support, up to 100W quick charge.
Add a Null Modem DB9 RS-232 serial port to a desktop/laptop using a USB-A port - DB9 screws pre-installed; DB9 Nuts included for device/cable compatibility - Resolve DCE/DTE conflicts without cross-wired cables/adapters; Rugged TPE construction; level-4 ESD protection; Copper shielding; Operating temp -40 C to 80 C - Transmit/Receive LED indicators; USB LED shows successful enumeration - Windows/macOS/Linux; 10ft/3m Cable; Max Baud 115.2Kbps; 128 Byte RX; 256 Byte TX FIFO; FTDI FT232R Chipset
TAA-Compliant Gigabit NIC with independent Realtek RTL8111H chips per port adds 2x 1Gbps ports to a desktop/server; Features link speed/activity LED indicators - 10/100/1000Mbps Network Adapter Card supports 9K jumbo frames/Wake-on-LAN (WoL)/VLANs for efficient network management - PCI Express NIC features pre-installed full-profile bracket with low-profile bracket included - Works with Windows/Windows Server/Linux and Intel/AMD hardware platforms that have a PCIe x1/x4/x8/x16 slot
3-Port M.2 SSD (NGFF) Adapter Card - 1 x PCIe (NVMe) M.2, 2 x SATA III M.2 - PCIe 3.0 Mount both PCIe (NVMe) and SATA based M.2 SSDs inside your computer using this PCI Express adapter card.
Add a DB9 RS-232 serial port to a desktop or laptop using a USB-A port - DB9 screws pre-installed; DB9 Nuts included for device/cable compatibility - Rugged TPE housing and level-4 ESD protection; Copper shielding; Gold plated connectors - Transmit/Receive LED indicators for port activity; USB LED for when the adapter has successfully enumerated on the desktop or laptop - Works with Windows/macOS/Linux; Max Baud 115.2Kbps; 128 Byte RX and 256 Byte TX FIFO; FTDI FT232R Chipset
Connect a serial RS232 (DB9) device using this PC Serial Card. Supports 16C1050 UART. LED status lights to monitor activity on the PCI express DB9 card - Use this serial interface card to connect barcode readers/receipt printers/scales PLCs/medical devices. The UART PCIe card can supply 5V or 12V over pin 9. Low profile bracket included - This card is ideal for IT applications e.g. server rooms/industrial control/automation/logistics/labs. Continue using legacy hardware with this RS232 PCIe card.
Add 4 RS232 serial ports to your standard or small form factor computer through a PCI Express expansion slot 4 port pcie serial card 4 port rs232 card 4 port serial adapter 4 port pci express serial card pci express db9 serial card.
PEXUSB312A2C2V - USB PCIe card with 2x ASM3142 chips for up to 20Gbps bandwidth total across 4 ports (2 ports/controller) - PCI Express adapter card (USB 3.2/3.1 Gen 2) 10Gbps 2x USB-A / 2x USB-C hub - Expansion card supports Multiple INs maintaining max bandwidth w/mixed speed devices For USB devices/external storage SSDs/NVMe - Optional SATA power for up to 15W per USB Type-C port and 4.5W per USB-A port - Install in PCI-e 3.0 x4 slot (desktop/server) Full profile bracket Windows/Linux/macOS
The PEX4S232485 4 Port PCI Express PCIe Serial Combo Card - 2 x RS232 2 x RS422 / RS485 lets you add two RS232, and two RS422/485 serial ports to your PC through a PCI-Express expansion slot. This PCI express serial card is a single card solution that is compatible with nearly any serial communication protocol, supporting RS-232, RS-422, RS-485 2-wire or RS-485 4-wire operating modes. A flexible solution for adding serial ports to full-sized, or small form factor systems, the 4-port serial card includes both low and full profile brackets while the included breakout cable helps to avoid cluttered connections.
The PCI Express Firewire card lets you add 2 FireWire 400 ports to your desktop PC allowing you to connect IEEE 1394A FireWire devices such as digital cameras external hard drives DV camcorders printers - This PCI Express to firewire adapter reduces performance bottlenecks by offering support for data transfer rates up to 400Mbps to each port - For broad compatibility the PCIE firewire adapter supports Windows and macOS 10.10-10.13 and includes full profile and half height installation brackets
The PEX4S553B Serial PCI Express card lets you add four RS232 serial ports using a single PCIe expansion slot. Includes both standard and low profile installation brackets features native PCIe single chip design.
USB 3.1 Gen 2 or USB 3.2 Gen 2x1 PCI Express Adapter card supports Multiple INs maintains max bandwidth w/mixed speed devices - Expansion Host Controller card w/ 1x USB-A/1x USB-C 10Gbps per port - USB-A/USB-C PCIe Card w/ UASP optimizes USB performance w/external storage devices SSDs/NVMe drives - SATA power for up to 5V 3A/15W (USB-C) + 5V 0.9A/4.5W (USB-A) - Install in full or low-profile PCIe 3.0 x4 slot (works w/PCI-e 2.0); Windows/Linux/macOS w/auto driver install; Works w/USB 3.0/2.0
Up to 10 Gbps fiber optic SFP card supports multimode/single mode fiber and copper such as SFP10GSRST/SFP10GLRST/SFP10GBTST - PCIe network card with MSA-compliant open SFP+ slot - Eliminate EMI and cover longer distances with fiber to host, 10Gbps open slot SFP+ port, MMF/SMF/Copper Support, 9K Jumbo Frames, IEEE 802.3ad Link Aggregation, IEEE 802.1Q VLAN tagging, PCIe 3.0 x4, Direct Attach Cable (DAC) support, Full Duplex, Low Profile Bracket included, Windows/macOS/Linux
Startech PCI2S1P2 Serial/Parallel PCI Card - PCI Serial Parallel Combo Card adds dual Serial RS232 and 1x Parallel Ports using a PCI card slot - Parallel LPT (DB25) Speeds up to 1.5Mbps, SPP/Byte/ECP/EPP modes, IEEE 1284 - Serial COM (DB9) Speeds up to 115.2Kbps, 16C550 UART, 5-9 bit character, Even/Odd/No/Space/Mark Parity - PCI expansion card (Asix MCS9865) pre-installed with 2x standard brackets (3x low profile brackets incl) - PCI adapter/controller card supports Windows 7+/Linux 2.6.x-4.x - Use card w/printer/scanner/plotter.
Add 2 external or internal SATA 6 Gbps ports to a computer through a PCI Express slot pci express sata 6 pcie sata 6 pci express sata iii card pci express esata pcie esata.
This 2S1P PCI Express adapter card adds two RS232 DB9 serial ports and a parallel port and features a native singlechip design that harnesses the full power of PCIe reducing CPU load up to 48% over bridge chip cards. Includes Low profile bracket.
Dual-Port PCIe network interface card with Intel I350-AM2 chipset adds two open SFP slots to a desktop/server - Works with Single/Multimode SFPs; LED Link/Speed indicators; 1Gbps (full-duplex) bandwidth per slot - PXE boot enabled for OS deployment/updates; Jumbo frame support for reduced packet overhead; VLAN support for network management - Works with Windows Server/Windows/Linux/VMware ESXi/Hyper-V; PCIe 2.0 compliant; Fits in PCI Express x1 or larger slots; Low-profile bracket included
1 Port LP PCI Express Serial Card (16550 UART) The PEX1S552LP PCI Express Serial Card turns a PCI Express slot into an RS232 (DB9) serial connection. Preinstalled low profile, half height bracket includes standard bracket.
1-Port 2.5Gbps PoE network card with Intel I225-V chip; Supports NBASE-T and multi-Gigabit speeds (2.5G/1G/100M/10M) w/ auto-negotiationEthernet NIC with Intel vPro support; PXE boot/9K jumbo/VLAN/WoL/QoS2.5GBASE-T PCIe network interface card features Link/Activity indicators; LAN transformer for reliable communication and reduced EMICompatible with Windows/Windows Server/VMware/Linux; PCI Express 2.0 x1; Includes a low-profile bracket
2 Port LP PCI Express Serial Card The PEX2S553LP low profilehalfheight PCI Express Serial Card turns a PCI Express slot into two RS232 (DB9) serial connections.
Startech PEXUSB312A3 - USB PCIe card has ASM3142 controller (PCIe 3.0 x2) w/2x USB-A ports Up to 10Gbps/port USB 3.1/3.2 Gen 2 expansion card New version of PEXUSB312A2 - USB PCI Express adapter card supports Multiple INs for max bandwidth w/mixed-speed devices - UASP optimizes performance w/ SSDs/HDDs/NVMe drives Supports USB 3.0/2.0 devices - SATA power header provides up to 4.5W/port - Add-on card w/ full or low-profile bracket incl. Win/Linux/macOS and auto drivers on Win 8 and up - Lifetime warranty
By adding 10Gbps USB-C ports to your computer with the ASMedia ASM3142 chipset you can harness the speed of USB 3.1 Gen 2 - USB 3.1 PCIe expansion card is a necessity for external drives and many other USB 3.1 Gen 2 peripherals - The USB 3.1 adapter PCI-e card includes an optional SATA power connector for high power devices - The card is backward compatible with USB 3.0 (5Gbps) and USB 2.0 (480mbps) devices - The USB 3.1 expansion card is compatible with Windows Linux and macOS operating systems
1-Port 2.5GbE M.2 Network Card with Intel I225-V-chip; Multi-gigabit speeds (2.5G/1G/100M/10M) - NBASE-T (802.3bz); PCIe M.2 2280 B or M key compatible - Intel vPro for remote management; PXE boot; 9K jumbo frame; VLAN support - Compact M.2 Ethernet card is ideal for systems that lack available PCIe slots - Includes 2ft (60cm) Cat6 adapter for flexible routing and full and low profile brackets - Windows/VMware/Linux compatible - Backed for two years and free lifetime assistance
Connect current and legacy serial RS232 (DB9) devices to a computer with this USB to serial cable - Use this USB to RS232 serial adapter to reliably connect barcode readers/scanners/networks switches/scales - This USB to serial cable is ideal for IT server rooms/industrial control/automation/POS/AV installations - Specifications: 3ft (91cm) Length, Max Baud 921.6 Kbps, 512 Byte FIFO, 5/6/7/8 Data Bits, Windows/macOS/Linux, Prolific PL2303 IC, Screw-lock Nuts.
Get the scalability you need by adding 7 USB 3.0 ports with SATA power to your computer - PCIe USB 3.0 Adapter Card - Standard and Low-Profile - UASP Support - 1 Internal and 6 External Ports - Native OS Support in Windows 8.1 and 8 and Linux kernel 2.6.31 or later for easy driver installation - Unique dual-profile design - USB 3 Controller backward compatible with USB 2.0 & 1.x devices
- 2-Port SATA III 6Gbps PCI Express 2.0 x2 expansion controller card w/Hardware RAID - RAID 0/RAID 1/SPAN (Big Disk)/JBOD (Just a Bunch of Disks) - Windows (7+) macOS (10.10+) Linux (2.6.32+) - OS booting on Windows/Linux for BIOS level RAID setup/config Included app on Windows for OS level RAID setup/config and monitoring Software RAID on macOS - PCIe adapter converter Ideal for laboratories/performance CAD or A/V work stations/data banks and schools Full/low-profile brackets
This 10G capable PCIe network adapter card enables high-speed data rates for desktops/servers leveraging existing Cat5e/6/6a cabling - Six-Speed NIC 10G/5G/2.5G/1G/100M/10M, 1x RJ45, PCIe 3.0 x2 Marvell AQC113CS 16K Jumbo VLAN PXE Boot AVB and PTP - The 10Gb network adapter card is supported by Windows/Windows Server/Linux. The six speed options and included low-profile bracket widen the compatibility of the network interface card with current/legacy devices
SIIG DP USB 3.0 7-Port PCIe i/e - Standard and Low-Profile Design - Get the scalability you need by adding 7 USB 3.0 ports with SATA power to your computer - PCIe USB 3.0 Adapter Card - UASP Support - 6 External & 1 Internal Ports - USB-A 5Gbps - x1 slot - Native OS Support in Windows 11/10/8 - Standard & Low-profile bracket - Backward compatible.
Startech PEXUSB314A2V2 - USB PCIe card w/ 4x USB-A up to SuperSpeed 10Gbps per port 2x ASM3142 chips (2 ports/controller) w/ up to 20Gbps total bandwidth USB 3.1/3.2 Gen 2 expansion card Upgraded version of our popular USB card PEXUSB314A2V - USB PCI Express adapter card has Multiple INs for max bandwidth w/mixed-speed devices - Ideal for SSDs/HDDs/NVMe - Optional SATA power for up to 4.5W per port - Install add-on card in full profile PCI-e 2.0 x4 slot Windows/Linux/macOS - StarTech.com lifetime warranty
8 port PCIe DB9 serial controller card with 16C1050 UART; Systembase SB16C1058PCI with bi-directional RS232 speeds up to 921.6Kbps per port; 256 byte FIFO; 15kV ESD - PCI Express RS232 serial adapter card with Pwr output of 12v/5v/none on DB9 pin 9; Max. 3A total - Expansion card with 18" DB62 to 8x DB9 breakout cable incl; Hex nuts incl. for opt. screw/nut DB9 interface - Windows XP and up/Linux; Compliant with PCI-e 1x Rev 1.0a/1.1 - Use in PLCs/control/automation/medical/scanner - Lifetime warranty.
Parallel PCIe card Add a DB25 parallel port using a PCI Express 2.0 Gen 1 full or low profile PCIe x1 card slot (brackets incl), Full profile bracket installed, Latest version of our popular PEX1P parallel card - TECH SPECS: SPP/Byte/Nibble/ECP modes, Compatible w/IEEE 1284 up to 2.5Mbps, Asix AX99100 chip - Use parallel port LPT controller with printers/scanners/plotters - Parallel port expansion/adapter card is compliant with PCI-e Base Spec. Rev 1.1/PCI Power Mgmt 1.2 - Windows/Linux.
