vendor delay, disco until further notice 9/10/15 Get ready for ultra-fast USB 3.1 Gen 2 (10 Gbps) data storage using your 2.5" SSD or HDD - 2.5 SATA Hard Drive Enclosure - 2.5" HDD Enclosure - 2.5" SATA SSD/HDD hard drive enclosure - USB 3.1 Gen 2 to SATA drive enclosure with UASP - Portable external data storage - Aluminum single-drive enclosure - Supports SATA III (up to 6 Gbps) - Backward compatible with USB 3.0 2.0 and 1.x - Powered directly from USB port - USB Type-A to Micro B cable for easy compatibility
M.2 NGFF SATA Enclosure - USB 3.1 (10Gbps) with USB-C Cable Turn your M.2 NGFF SATA drive into an ultra-fast, ultra-portable storage solution for USB-C enabled devices.
This Dual M.2 PCIe SSD Adapter enables you to install 2x PCIe M.2 SSDs (NVMe or AHCI) into a computer through an available x8/x16 PCI Express 4.0 slot Read and write speeds up to 7.8GBps per drive. PCIe Bifurcation support is required by the Computer/Motherboard, Compatible with PCIe 3.0 x8 or x16 slots, Windows/Linux Access the M.2 PCIe SSDs individually, Software RAID support for RAID 0/RAID 1/JBOD. Vented fullprofile bracket preinstalled and lowprofile bracket included.
Turn your solid state drive into an ultra-portable pocket drive, with our M.2 external SSD enclosure - Compatible with USB 3.0 computers such as MacBook, HP Probook & Samsung Chromebook and M.2 solid state drives - M.2 SSD / USB 3.0 Hard Drive Enclosure / Pocket Drive / USB 3.0 SSD Enclosure / Portable Data Storage / SATA 6Gbps SSD Enclosure / - Re-purpose an M.2 SSD as a USB 3.0 external drive - Carry with your laptop for a highly portable, high-performance external storage solution
This rugged M.2 NVMe PCIe SSD Enclosure is a highly portable and high-performance data storage solution for your USB-C devices - The enclosure for PCI Express based NVMe SSDs comes with an IP67 rating which means that it's both dust and water resistant - The USB C M.2 NVMe enclosure delivers USB 3.1 Gen 2 read/write speeds up to 10Gbps which is nearly twice the capability of traditional SATA hard drive enclosures - The Rugged SSD Enclosure offers superior speeds which is ideal for data-migration
This 3.5in SATA hard drive hotswap bay allows you to install two 2.5in SATA drives in an availableunused 3.5in floppy drive bay. The drives dont need to be "mounted" in the bay saving time and hassle with swapping out storage.
This Quad M.2 PCIe Adapter Card enables the installation of 4x PCIe M.2 SSDs (NVMe or AHCI) into a computer through an available x16 PCI Express 4.0 slot, Read and write speeds up to 7.8GBps per drive - PCIe Bifurcation support is required by the Computer/Motherboard, Compatible with PCIe 3.0 x16 slots, Windows/Linux - Access the M.2 PCIe SSDs individually, Software RAID support for RAID 0/RAID 1/RAID 5/RAID10 or JBOD - Vented full-profile bracket pre-installed.
This 3.5in SATA hard drive hotswap bay allows you to install a 3.5in SATA drive in a 5.25in drive bay. Removing the drive is as simple as opening the front panel door; to reinsert a drive simply insert the drive until the door closes.
- USB-A/USB-C to M.2 SSD Enclosure is compatible with PCIe M.2 NVMe and SATA AHCI M.2 SSDs - USB 3.1 Gen 2 10Gbps UASP support PCI Express 3.0 - For PCIe (M-Key) and SATA (B+M-Key) drives sized 2230/2242/2260/2280 incl Samsung 850/860/870/950/960/970/Kingston/Western Digital/HP/Intel - USB Type-C + USB Type-A cables Screwdriver incl. - Portable external M.2 NGFF SSD Enclosure Adapter with aluminum housing protects SSD Vented case for heat dissipation - Not compatible with 22110mm
Turn your M.2 NVMe drive into an ultra-fast ultra-portable storage solution for your USB-C or Thunderbolt 3 devices- Experience an extremely fast performance with support for USB 3.1 Gen 2 and PCI Express 3.0 - Designed with a small footprint, this NVMe enclosure features a lightweight design and USB-powered performance - Enclosure is built with a solid aluminum housing and is also designed with ventilation holes for optimal heat dissipation to preserve performance.
Convert an m.2 NGFF solid-state drive into a Standard 2.5in SATA III 6Gbps SSD - Compatible with M.2 NGFF SSD and SATA-enabled host devices such as Desktop & Laptop computer systems and Hot Swap 2.5in SATA Bays - M.2 to SATA Adapter / M.2 to SATA Converter / NGFF to SATA Adapter / NGFF to SATA Converter / Install M.2 Drive in 2.5in SATA Bay / M.2 NGFF to HArd Drive Adapter - Install an M.2 NGFF SSD into a SATA-enabled computer system to improve performance
USB C cable supports Power Delivery 3.1 Extended Power Range (EPR); Up to 240W at 48V; Ideal for high-power laptops including 16in MacBook Pro M3 Pro/M3 Max - USB-IF certified w/E-marker for consistent PD output; Supports 140W/100W/60W - Nickel-plated connectors; 30AWG wire; Durable TPE jacket is shielded for ehanced EMI protection - 240W/5A PD 3.1 EPR; USB 2.0 Type-C (480Mbps); 3-foot; Black; 4mm (0.16in) O.D.; TPE Jacket w/Braided Shield; NOTE: USB-C video (DP Alt Mode) is not supported
