LAPTOP STAND: This aluminum laptop riser is constructed with 2 angled (16 ) supporting arms lined with rubber pads and a lip at the end act as stopper; Tool-less assembly - The desk laptop holder weights 2.13lbs and supports up to 11lbs; Dimensions 10.2x8.7x5.6in - The arms sit 4.17in and 5.67in high and are spaced 6.3in providing airflow and storage room underneath - HIGH QUALITY: The laptop stand for desk has an anodized silver finish; Non-skid pads at the bottom; Each piece is 0.19in thick
Designed for commercial applications where wall space is limited, the MB Series telescoping ceiling mount system offers a flexible solution for displaying menu boards and other digital signage. Its modular rails allow two to four screens to be placed adjacent to one another in portrait or landscape orientation, while precision leveling screws ensure perfect alignment. Achieve proper line-of-sight with easy height adjustments and four discrete tilt settings. This all-in-one mounting solution includes everything you need for wood and concrete installations and can swing up to 90 to accommodate sloped ceilings and support beams. Modular Design - Available in three models, MB ceiling mounts support two to four screens weighing up to 66 pounds each. Their modular design allows for additional extrusions to be added to accommodate TVs with wider VESA patterns, or to connect multiple units together.EASY INSTALLATION - To reduce strain, the MB series uses lightweight ceiling plates that are installed independently of the rest of the mounting system. Simply slide each extension pole into place and secure it to complete the installation. The ceiling plates also provide up to 90 of swing to account for sloped ceilings and support beams, or to secure the mount to a wall. PRECISION LEVELING - Each mounting bracket allows for micro height adjustments to be made to ensure your TVs are level and perfectly aligned. ADJUSTABLE HEIGHT - The telescoping extension pole allows you to position the center of the TV mounting plate between 24.3 and 39.3 from the ceiling. For tighter spaces, remove the inner pole to achieve a distance of 12.7" to 17". EASY TILT - Tilt the mounting brackets 5 , 10 or 15 forward to improve line-of-sight while maintaining alignment between your screens. To compensate for potential lean, the brackets can also be angled up to 6 backward. CABLE MANAGEMENT - The extension pole s hollow core provides an unobstructed path to route your cables, while an opening in the mounting plate allows them to continue through the ceiling for a truly professional setup.
Designed to safely support 200 pounds, the MTMA100PL rolling TV stand is built with high-grade aluminum to provide a lightweight, fully portable TV mounting solution for schools and offices. Its camera shelf and height adjustable device tray allow you to conveniently carry your AV equipment, while two handles and four wheel-locks ensure maximum stability. Quick to assemble, this modern TV cart features 12" of height adjustment, as well as integrated cable management to ensure a clean and professional looking setup. ALUMINUM CONSTRUCTION - Capable of supporting 200 pounds, the lightweight aluminum structure makes it incredibly easy to roll your TV and accessories around any home or office setting. DEVICE TRAY & CAMERA SHELF - Use the height adjustable device tray to carry your laptop, PVR, or other AV hardware weighing up to 25 pounds. A top shelf is also included for a webcam, making the MTMA100PL perfectly suited for web conferences. MAXIMUM STABILITY - Along with two handles to improve maneuverability, four wheel-locks are provided to ensure your TV and equipment remain securely in place. Simply step down on each pedal to enable the locking mechanism and flick up to release. EASY HEIGHT ADJUSTMENT - Using the provided Allen key, adjust the center of your TV anywhere between 54.7 (139 cm) and 66.5 (169 cm) from the floor to achieve an ideal viewing height. This adjustment should be done with the TV removed. INTEGRATED CABLE MANAGEMENT - The hollow towers allow you to discreetly route your cables for a clean and professional appearance. Grommets are also provided to keep your cables securely in place. VESA COMPLIANT - Designed to fit most 60 to 100 flat screen TVs, the TV mounting brackets can be configured to accommodate virtually any VESA pattern from 200x200 to 1000x600.
Triple monitor desk mount for up to 15.4lb 27inch displays; VESA 75X75/100x100mm - One-touch spring-assisted articulating arms - Tool-Less ergonomic arms with +/-180 swivel +/-90 tilt; VESA +/-90 rotation; for portrait/landscape screens - Max arm extension 28.4" and 8.8" height range; Unique top-screw desk clamp for hassle-free installation without going under desk - C-clamp/grommet mounting; Max 2" thick desk; Adjustable arm tension - Cable management under arms and cable clip on the pole.
Premium articulating wall mount TV bracket for displays up to 65 inch; VESA patterns from 200x200-400x400; Max weight of 99lb; For flat/curved screen TVs - Adjustable corner TV wall mount features steel/aluminum frame; Supports +/-90 swivel +/-15 tilt - Steel and aluminum construction; Articulating TV wall mount features, bubble level/wall plate with keyhole mounting/cable management - Single stud TV mount includes mounting hardware/accessories; Extendable TV wall mount ships assembled
Single-Monitor Arm - Laptop Stand - One-Touch Height Adjustment Raise your laptop and monitor off your desk, to create a dual-display workspace and increase productivity.
Save space by mounting two monitors 13" to 27" onto a single low-profile base with this desk-mount dual monitor arm - Desk-clamp or grommet-hole monitor mount - Double monitor mount with adjustable height along the pole - Adjust for optimum viewing with +/- 30 degree tilt and +/- 30 degree swivel - Micro-adjustment feature lets you perfectly align your monitors - Place monitors close to a wall or cubicle wall with a low-profile design - Dual screen mount supports max weight of 17.6 lb / 8 kg) per monitor
The PT300 is a dualstud, tilting wall mount designed to support TVs up to 90 inches. Its pretensioned mounting brackets provide 12 of forward tilt, helping to reduce glare and improve lineofsight with your TV. Each bracket is equipped with a horizontal leveling screw to facilitate precision leveling, a Torx screw and locking feature to protect against theft, and a quickrelease cord for easy removal of your TV. Sitting 1.4 inches from the wall, the PT300 s wall plate is wide enough to accommodate both 16 and 24inch stud spacing, and comes with all the hardware you need for wood stud and concrete installation.12 Degrees of Forward Tilt Tilt your TV to reduce glare and improve lineofsight.Horizontal Leveling Screws Ensure your TV is perfectly level by adjusting two screws.Low Profile Design The PT300 s slim wall plate allows your TV to sit 1.4 from the wall.QuickRelease Cords Two quickrelease cords allow for easy removal of your TV.Everything You Need The PT300 Includes all the hardware needed for both wood stud and concrete installation.
The PS200 is a single stud articulating mount designed to mount most flat panel TVs from 26 to 60 . It will hold TVs weighing up to 88 pounds, and offers extension, tilt and swivel capabilities to provide you with a wide range of viewing positions, yet sit close to the wall when pushed back. Solid steel construction, attractive detailing and a durable powder coated finish make this mount a great addition to your home or office. An integrated cable management system allows you to route your cables quickly and easily and simple covers finish off the lookFits most flat panel TVs from 26 to 60 , supports tvs up to 88 lb 40 kg, accommodates VESA sizes: 100x100, 100x150, 100x200, 150x100, 150x150, 200x100, 200x150, 200x200, 200x250, 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400Accessible tilt mechanism provides 12 of forward tilt and 2 of backward tilt, 90 of swivel in either direction, dependent on screen sizeSits 2 5.1 cm from the wall, extends up to 13.8 35 cm from the wall, integrated cable management systemSingle stud wall plate with 11.7 29.7 cm offset left or right, solid steel construction with durable powder coated finishIncludes manual and all mounting hardware for wood stud and concrete installation.
The MTM65PL provides a safe way of maneuvering your TV around any home or office setting. Its steel frame is quick to assemble and features 2inch rubber casters to smoothly roll it between locations. Along with a top shelf suitable for a webcam, this rolling TV stand includes a heightadjustable plastic tray to conveniently carry your laptop, PVR, or other digital devices. Its telescopic center columns offer 16 inches of height adjustment and feature integrated cable management for an exceptionally tidy setup. To ensure your TV and accessories remain secure, each wheel includes a quickrelease lock that can be easily applied and released with your foot.SUPPORTS 80 POUNDS Constructed out of steel, the MTM65PL safely supports 37 to 65 TVs weighing up to 80 pounds, and features adjustable mounting brackets to accommodate VESA sizes from 100 100 to 600 400SIMPLE HEIGHT ADJUSTMENT Height adjustments are made easy with two buttons located on the center columns. In 2? increments, place the center of your TV anywhere between 44.1? and 60.2? from the floor for optimal viewing.DEVICE TRAY The MTM65PL includes a heightadjustable device tray capable of supporting up to 10 pounds, providing a stable surface for your laptop, PVR, or other digital devices. A top shelf is also included to conveniently place a webcam, making this stand perfect for web conferences.INTEGRATED CABLE MANAGEMENT Keep your cables organized and outofsight by routing them through the stand's hollow support columns.QUICK RELEASE WHEEL LOCKS Ensure your equipment remains stable with four wheel locks. Simply step down on the pedal to enable the locking mechanism and flick up to release.
USB-C Laptop Stand with Dual 4K MST Docking Station, adds Dual 4K@30Hz displays, one USB-C 5Gbps, two USB-A 5Gbps, one Gigabit Ethernet, one 3.5mm Headset Jack, and PD up to 85W to Windows/Mac computers, fits 10" to 17" laptops, weights up to 13.23 lbs (6 kg)
Chiefs FIT Flat Panel Single Ceiling Mounts are installer inspired and offer perfect TV positioning and flexible adjustments for large flat panel screens. Great for large digital signage installations.
***IDENTICAL SPECS TO WMK047 includes extra bracket****** Wall Mount Support for 48"-98" CDE, CDM, CDP, CDX, IFP Displays, VESA Standard Support up to 900x616mm, Max Load 150KG, M8 Screw, Slide-in Plate for VESA Standard 75x75/100x100 Device, Black
KTP445B 2x2 Array Widescreen Quad Monitor Table Stand Provides a rock solid, free-standing solution for graphic designers, broadcasters and other users who work with multiple small flat panel monitors and is Compatible with monitors up to 30" wide. Features include Centris Technology provides smooth, fingertip tilt in all directions, Heavy-duty, solid steel base and oversize pole for unmatched stability, Independent adjustment of each screen for proper ergonomic alignment and is VESA 75 x 75 mm and 100 x 100 mm compatible - Black
