Fixed Heavy-Duty Shelf supports up to 250 lbs. Designed for 4 post rack mounting. 25.5 inch shelf depth. Accomodates tower units, monitors, and other equipment. Cold rolled steel with black finish. Required mounting hardware included.
Offered in 25% open area perf configurations. Beveled corners provide a stylish modern appearance while hinging either left or right. Black textured powder coat finish. Includes keylock. Vented front door with 25% open area. Can be installed to hinge right or left. Black textured powder coat finish.
The DWR Series Wall Racks are now Forward and Lever Lock compatible providing maximum mounting capacity on and off the rail and a suite of tool-free accessories making rack installations 5Xs faster! 16RU and 22" Deep Now equipped with the revolutionary Forward rackrail giving you the ability to use Forward blank panels, vent panels and horizontal cable management. Rear rackrail is optional (FWD-DWR-RRxx). Now accepts patented Lever Lock tool free and hardware free internal device and cable management system accessories in the center section and the backpan (with LL-DWR/SR-BP). Robust welded steel construction, with Seismic certification when used with DWRSR-ZL latch. Center section rear channel accommodates optional PDT and PD Slim PDUs to save space. Tool-Free Quick-Mount system for easy, one-person mounting of the center section to the backpan on the jobsite. Optional minimum-clearance latch allows side-by-side or interior corner mounting to save room. Center section swing is reversible, and can be both key-locked and padlocked. Center section is keyed differently from optional front door for additional security. Designed for active or passive cooling to support all systems.
Wall Mount Shelf (WMS-18-SW) Wavenet offers a shelf designed to mount onto a wall when floor space is limited. The 18†deep by 22†wide vented wall-mounted equipment shelf provides a durable solution for wall mounting any non rackmount equipment in your server room. House your electronic equipment on this metal server shelf, it is easy to install, sturdy enough, and comes at a very economical cost.The bottom of the shelf is vented to provide airflow to cool mounted equipment. The left and right sides of the shelf have 8 tie points to secure cables. Also, the bottom of the shelf has three flexible holes to allow you to easily route network, power, display, or another cabling as needed.Four mounting holes are incorporated to support up to 140 lbs load capacity when properly installed and have a large rear opening for connecting non-rackmount equipment. With the wall mounting holes positioned 16inch apart, it exactly matches the standard drywall construction framework, to ensure simple and secure wall-stud anchoring.Constructed using SPCC commercial-grade cold-rolled steel with an adept look black powder-coat finish that ensures that they keep all edges. Smooth surfaces reduce the possibility of injury or wear on cable jackets. Ergonomic design and secure attaches ensure to take up minimal space for more equipment and wiring distribution options.Features:The shelf bottom includes three 1†knockoutVented bottom for air ventilation and dissipation of heatThe left and right sides have tie points to secure cablesIncludes center opening and bottom knockouts16†on center between wood studs mountingMaterial: 16-Gauge Cold Roll SteelColor: Black Powder CoatingMaximum capacity: 140 lbs (63.5 kg)Measures: 15.3†H x 22†W x 18.2†DPackage Includes:1 x 18†Deep Wall Mount ShelfIncludes Mounting Hardware
8-Ports Blank Panel Module (WPK10080-E) The 8-port blank module has a sturdy metal rackmount hardware design that allows for seamless use with various keystone modular connectors to then create perfect audio, video, or data connection. Eight keystone places are the ideal solution for managing and distributing home low voltage wiring.Made from quality SPCC, commercial cold-rolled steel for long-lasting use, and the ability to withstand the weight and torque when used together with cables and keystone jacks. Black powdered coated finish that ensures that they keep all edges and surfaces smooth, greatly reducing the possibility of injury or wear on cable jackets.This module is easily installed in all Wavenet's structured wiring enclosures. Simply align the mounting pins with the grid holes in the back of the enclosure. With the mounting pin plungers in the ‘out’ position, press the unit into the grid in the desired location, and secure by pushing the plungers in.Features:8 blank cutouts for standard size keystone jacksConfigurable with various keystone modular connectorsFits easily into a standard structured media enclosureNumbered ports for easy connection identificationIdeal for multiple media applicationsCold-rolled steel constructionSurface Finish: Powder CoatColor: Black Package Includes:8-Ports Blank Panel Module
The 3U 19"-width 15"-deep cantilever shelf lets you optimize your working space by giving you the ability to mount equipment to your rack instead of taking up desk or floor space.
The vented bottom shelf plate ensures consistent airflow to encourage safety, proper air circulation, and lower temperatures while maintaining structural integrity.
Save space in your office or server room by placing non-rackmount IT or AV equipment on your rack. The compact form factor and front mount options make it ideal for any server rack
You can install the 3U rack shelf in your rack at any height, giving you a stable surface for placing equipment that's un-mountable or storing your tools, to keep them readily accessible.
Heavy-duty cantilever tray has a sturdy black powder finish, constructed of durable 16-gauge SPCC commercial cold-rolled steel with vented holes, takes up 2U of space, and holds up to 75lbs.
3U Server Rack Shelf (SHELF-15SSS-N)
The servers deployed at data centers require particular management and handling to ensure that the overall system works efficiently. For this purpose, rack mount shelves are considered an essential accessory and allow you to accommodate both non-rack mount equipment and half-rack width equipment without getting tangled up in wires, providing easy access for maintenance.At 15 inches deep, this shelf unit is perfect for any custom network rack build. Great for in-studio work, on-stage performances, or even smaller home network solutions. It is easy to install, sturdy enough and comes at a very economical cost. This model is highly recommended!The vented rackmount cantilever tray improves consistent airflow around devices on the shelf and within the rack to effectively dissipate heat on your equipment. Also, the shelf mounts in multiple orientations with a ridge on one side to prevent equipment from sliding off.The max weight load capacity of this model is 75lbs(34kg), and it is fully compatible with all EIA/ECAâ€310â€E compliant 19-inch server racks and server shelves. Versatile and adaptable, this server rack shelf has multiple applications and can be installed in various locations.Constructed using SPCC commercial-grade cold-rolled steel with an adept look black powder-coat finish that ensures that they keep all edges. Smooth surfaces reduce the possibility of injury or wear on cable jackets. Ergonomic design and secure attaches ensure to take up minimal space for more equipment and wiring distribution options.Features:Takes up 3 Unit SpaceCompatible with standard 19-inch racksHave vented bottom and singleâ€sided 15†deepUsed with 2â€Post, 4â€Post Racks, cabinets, and wall racksCompatible with standard 19-inch wide equipmentMaterial: 16-Gauge Cold Roll SteelColor: Black Powder CoatingMaximum capacity: 75lbs(34kg)EIA/ECAâ€310â€E CompliantPackage Includes:1 x 3U 15" Vented Bottom, Singleâ€Sided Rack Shelf8 x #12â€24 Mounting Screw
Inline Coupler RJ12/RJ11 6P6C Straight - Beige
This inline coupler provides a female-to-female feed-through connection for easy cable hookup. Use for data/voice applications.
Reverse couplers reverse the right to left order of the pins inside the connectors. This coupler has 6Â pins for RJ12 or RJ11 connectors.
For connecting two male RJ12(RJ11) connectors together, you can’t go wrong with this Inline Coupler. This professional coupler features two female RJ12/RJ11 jacks. RJ12/RJ11 ends are most commonly found as connections on data cables such as modems and phones. This tiny adapter has a smooth white finish for inconspicuous installations and is specifically designed for straight-through applications. Other couplers are available for those who need a crossover or shielded configuration.
It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.
Here’s an in-depth look at the specifications of this Straight Inline Coupler
Female to Female coupler
Accepts RJ 12s (6P6C) / RJ 11s (6P4C)Â
Type: Straight-Through RJ12 / RJ11
Use for data/PBX applications
This coupler has 6Â pins for RJ12 or RJ11 connectors
Color: Beige
Inline Coupler RJ12/RJ11 6P6C Reverse - Beige
This inline coupler provides a female-to-female feed-through connection for easy cable hookup. Use for data/voice applications.
Reverse couplers reverse the right to left order of the pins inside the connectors. This coupler has 6Â pins for RJ12 or RJ11 connectors.
For connecting two male RJ12(RJ11) connectors together, you can’t go wrong with this Inline Coupler. This professional coupler features two female RJ12/RJ11 jacks. RJ12/RJ11 ends are most commonly found as connections on data cables such as modems and phones. This tiny adapter has a smooth white finish for inconspicuous installations and is specifically designed for straight-through applications. Other couplers are available for those who need a crossover or shielded configuration.
It doesn’t matter to us how long you plan for your cables to be joined, either. You can still enjoy our picture-perfect match of low prices and high performance. With our signature lifetime warranty, you can expect this coupler to create quality connections for as long as you both shall live.
Here’s an in-depth look at the specifications of this Crossover Inline Coupler
Female to Female coupler
Accepts RJ 12s (6P6C) / RJ 11s (6P4C)Â
Type: Crossover-Through RJ12 / RJ11
Use for data/PBX applications
This coupler has 6Â pins for RJ12 or RJ11 connectors
Color: Beige
Suitable for Blu-Ray Players, DVD players, Game Consoles, Set-to-boxes, and other AV components
Maximum dimensions of components: 9.25 inches (length) x 13.38 inches (width) x 17.91 inches (height)
Supports audio/video components up to 11 pounds (5 kg)
Very simple to install. All of the mounting hardware is included
Package Include: Universal Adjustable AV Shelf Wall Mount - 2 Shelves. Comes with Lifetime Manufacturer Warranty
Universal Adjustable AV Support DVD Wall Mount – Two Shelves (Maximum 11 Pounds)
Did you ever try to install several wall shelves in a room where everything had to look perfect and there was no room for error? Not easy, was it? In fact, you probably wished (more than once) there was a much easier way to deal with the situation.
Enter the Cmple universal, adjustable AV support DVD wall mount with two shelves. This clever and compact unit is perfect for quickly and simply installing two “wall shelves,†which can hold two components for your audio-visual system such as Blu-ray players or set-top boxes – and it eliminates the need to wrestle with large and difficult-to-install shelving. And there’s no muss, no fuss, and virtually no chance you’ll mess up the installation in your beautiful new AV or living room.
Here’s what’s behind this attractive, black-and-silver wall mount: a small pillar that only measures about a foot-and-a-half tall and just over three inches deep. After you attach it to the wall, you simply open the two sets of black arms (which extend wide enough to hold almost any AV component comfortably) and place one component onto of each set of arms. You can adjust the arms to fit the width of the cable box or DVD player, and you can move each set up or down on the pillar so there’s enough room to match the components’ height. The only constraints are that the boxes can’t weigh more than a total of 11 pounds, and can’t be more than 18 inches tall.
This mount is infinitely easier to install than heavy, bulky shelves which might take two people using a rule, a level and who knows what other tools. And with its silver-and-black pillar and black arms made of aluminum and steel, it’s probably sturdier and better looking than any shelves you’d put up yourself. It’s also a far better alternative than putting the Blu-ray player and set-top box on nearby cabinets or tables – or the floor – and running unsightly wires to your television. The Cmple AV universal mount even comes with a cable management system to keep all of the wires you need to run between units nicely organized and out of sight. All anyone will be able to see are the two components being held in place, the jet black shelves, and maybe a few inches of the attractive mount pillar. Everything will blend right in with the television and the rest of your room.
Checking out the key specifications of the Cmple two-shelf universal adjustable AV support DVD wall mount:
Fits DVD players, Blu-ray players, set-top boxes, and other AV components
Maximum dimensions of components:Â 9.25 inches (length) x 13.38 inches (width) x 17.91 inches (height)
Back pillar size:Â 17.91 inches (height) x 3.34 inches (width)
Holds audio/video components to a total weight of 11 pounds (5 kg)
Materials: steel and aluminum
Installation instructions included
Cable management included
Adjustable shelf can be adjusted to match component width, depth and height
Two shelves
M6 Rack Mount Hardware Kit A cage nut is used on a rack that has square mounting holes. You would use a cage nut when you need to mount a product in your rack that requires a threaded hole. A cage nut is nothing more than a square nut that has threaded holes wrapped in a piece of spring steel designed like a cage. This spring steel has two flanges that when pressed together allow the cage nut to be inserted into the square hole and simply clip in. When this is done, you now have a round hole that is threaded. The nut is loose in the cage to allow for adjustments when installing the screw. Features:Type: M6 Thread Phillips Pan Head Machine ScrewsFor Racks, Shelves, Cabinets with Square Mounting HolesCompatible with 0,375†(9.5 mm) square-punched holesSqueeze-and-release design greatly reduces installation timeScrews & Cage Nuts Material: Carbon SteelCorrosion and Rust-Resistant PlatingWashers Material: NylonColor: BlackPackage Includes:25 x M6 Screws25 x M6 Cage Nuts25 x Nylon Washers
DVD/AV Component Wall Mount Shelf - Black The wall mount has a maximum load weight limit of 8kg or 17.6lbs. This means that hanging anything heavier than 17.6lbs / 8kg is not recommended and not safe. Hanging up your TV is as easy as 1-2-3. All hardware is included in the package. Necessary there is no need to go around stores. Simply follow the instructions provided by the manufacturer and you will have no problems hanging up your TV. Features & Specifications: DVD brackets for audio/video component With 0.23in black tempered glass shelf Glass size: 17.71(L) x 12.99(W)in Support Audio/Video component up to 8kgs/17.6lbs Installation instructions included Color: Black This bracket is not only handy, but also safe. It has been tested for the presence of Lead, Cadmium, Mercury, Hexavalent chromium, Polybrominated biphenyls, and Polybrominated diphenyl ethers, which are hazardous for the human thehealth if used in above normal amount.
SLEEK TEMPERED GLASS SHELF - Single wall shelf designed to hold DVD players, DVRs, HD recorders, Cable TV Boxes, AV components, gaming systems, for storage of CDs, DVDs and any other media, even to mount projectors. ELEGANT AND STRONG - The black tempered glass shelf is tinted and support various equipment. Thick 6mm tempered glass support up to 17.6lbs or 8kgs. The wall bracket should be installed on a wall stud for safe floating shelf installation. FLOATING DESIGN - This unit is designed to fit under your display and provide an on wall solution for other components such as cable boxes, DVD players, game consoles, and stereo components. It can be used with or without a Plasma/LCD mount. EASY AND SIMPLE INSTALLATION - Mounting hardware and easy to use instructions included. Simplest construction allows easy installation and a neater look. PACKAGE INCLUDE - Cmple Floating Shelf Wall Mount for Games Consoles and other A/V Devices - 1 Shelf, Black DVD/AV Component Wall Mount - Black The wall mount has a maximum load weight limit of 8kg or 17.6lbs. This means that hanging anything heavier than 17.6lbs / 8kg is not recommended and not safe. Hanging up your TV is as easy as 1-2-3. All hardware is included in the package. Necessary there is no need to go around stores. Simply follow the instructions provided by the manufacturer and you will have no problems hanging up your TV. Features & Specifications: DVD brackets for audio/video component With 0.23in black tempered glass shelf Glass size: 11.81in(L) x 9.84in(W) Support Audio/Video component up to 8kgs/17.6lbs Installation instructions included Color: Black This bracket is not only handy, but also safe. It has been tested for the presence of Lead, Cadmium, Mercury, Hexavalent chromium, Polybrominated biphenyls, and Polybrominated diphenyl ethers, which are hazardous for the human thehealth if used in above normal amount.
Anti-Theft Elegant Aluminum and Steel Projector Ceiling Mount - Black Cmple 1074-N Projector Mount will help to deter thieves and protect your projector from theft. It's designed to fit most projectors up to 20 kg and features fully adjustable functions so you can find the best viewing position. Offers 360° rotate and 15° tilt for multi-angle viewing. Theft resistant design is useful for commercial customers. It offers flexible projector positioning with four adjustable support arms that can fit a wide range of mounting holes. Warning: The installer of these products must verify that the mounting surface, ceiling or wall, will safely support the combined weightof all attached equipment and hardware.We will not be held liable for the improper use or installation of these products. Specifications: Aluminum ceiling projector brackets Tilt Range: +15°~-15° Legs adjustable from 6.3inch to 13inch diagonally for small to large projectors Ceiling to projector: 2.4†(6.2cm) Max load capacity: 20kg/44lbs With lock system Installation Manual included Color: Black
SLEEK TEMPERED GLASS SHELF: Single wall shelf designed to hold DVD players, DVRs, HD recorders, Cable TV Boxes, AV components, gaming systems, for storage of CDs, DVDs and any other media, even to mount projectors. ELEGANT AND STRONG - The black tempered glass shelf is tinted and support various equipment. The wall bracket should be installed on a wall stud for safe floating shelf installation. Shelf bracket can support up to 17.6lbs or 8kgs. ADJUSTABLE MOUNT - The tempered black glass is 5 mm (approximately 0.2 inches) thick. The height of the shelf can be adjusted up and down on the back plate. This allows you to adjust the vertical clearance you would need for different components. EASY ASSEMBLY: Mounting hardware and easy to use instructions included. It is very easy to install. This shelf can be installed in 1 corner on the wall with an adjacent on the other corner. Cable management allow you to route cables neatly to your components. PACKAGE INCLUDE: Cmple DVD Bracket for DVD/Blu-Ray Players / Audio Video component devices - 1 Shelf, Black Cmple - One Shelf Floating Tempered Glass DVD Mount Cmple DVD Shelf Mount is a single-column AV component system that mounts directly under wall-mounted TVs for a sleek, streamlined look. Its thick tempered glass can hold up to 8kg/17.6lbs of DVDplayers or most any other AV components. The tempered glass shelf to be installed on the shelf holder can be vertically adjusted along the aluminum wall plate to accommodate any AV component arrangement.The center column features two integrated channels for easy power cable and signal wire routing. This shelf has been designed for holding home devices like DVD/Blu-ray player/recorder, sat receiver, set-top box etc. Glass shelf is made of tempered glass of 5 mm thickness.The support has been made of aluminum - it is light and very stable. The position of the glass shelf is adjustable. The wall has to carry the load of the shelf and the devices, including a wide margin of safety.The shelf cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc).If you are uncertain about the nature of the wall, consult an installation company. Safety warning. The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer.Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation. Improper installation may cause damage or serious injury.Do not use this product for any other purpose than specified. Specifications: Dimensions: is 14.2†x 11†x 8.5†Maximum Support Weight 17.6lbs (8kg) on each shelf Wall Plate: Made whit high-quality aluminum alloy material. Glass Shelf: Tempered glass with the black opaque coating. Glass thickness: 5mm Cable management keeps everything organized
Economy Aluminum and Tempered Glass DVD Mount (Three Shelves, Max 17.6 Pounds) When televisions were huge and heavy boxes, large floor-based “entertainment centers†were all the rage. The TV was the centerpiece, of course, with cable boxes, VCRs and audio receivers scattered on the various shelves (or hidden behind sliding doors) and a bird’s nest of cables twisting and dangling behind the entire unit - which had to be positioned well away from the wall because of the television’s enormous depth. Today, TVs are slim, light and (for the most part) beautiful appliances. They certainly don’t need to be placed on bulky entertainment centers; they can either fit onto a small stand or table - or even better - be mounted on the wall. That’s a terrific step forward, but it still leaves all of those other components which used to fit nicely into the large multi-purpose unit. Where do they go now? The optimal solution is to place them on wall shelving right next to (or below) the television so that long cable runs aren’t necessary to reach the TV, and it’s easy to control everything with one remote. The Cmple economy aluminum and tempered glass three-shelf DVD mount is the stylish, inexpensive way to do just that. Large, unwieldy wooden shelving is often difficult to mount, can cost a lot of money, and quite frankly, it’s likely to be an eyesore next to a modern flat screen TV. The Cmple DVD mount is contemporary in appearance, so it will blend right in with the look of your television rather than drawing attention away from it. And with three beautiful, black tempered glass shelves, it can accommodate all of your components on one compact unit. The mount itself is lightweight aluminum, easy to position and install without needing helpers; it’s less than two feet in height and about three inches wide, so it doesn’t require a lot of space on the wall. Three glass shelves, each approximately 15 inches wide, 11 inches deep and only 0.20 inches thick, then fit into slots on the mount. It’s that simple. The shelf height is completely adjustable, meaning you can place all three shelves exactly where they need to be in order to accommodate the height of your components. And the unit has cable management slots and holes, allowing you to bundle the cables together for an easy run to your television. The only constraint is that the weight limit for the wall mount is 17.6 pounds (8 kg), so placing more weight than that on the shelves could be unsafe and endanger your components or whatever’s below the unit. With today’s lightweight components, though, it should be no issue placing common components like cable boxes and BluRay players on the shelves on the unit, for an easy and eye-pleasing display. This Economy Aluminum and Tempered Glass DVD Mount is available with one, two or three shelves as well. Checking the specs of the Cmple economy aluminum and tempered glass three-shelf DVD mount: Universal DVD wall mount Three black tempered glass shelves Glass measurements: width: 14.96 inches, depth: 11.02 inches, thickness: 0.20 inches Back pillar measurements: height: 22.83 inches, width: 3.14 inches, depth 0.78 inches Holds audio/video components with total weight of 17.6 pounds (8 kg) Cable management included Shelf heights adjustable RoHS compliant Installation instructions included Color: Black Attractive, functional and adjustable. There’s not much more you could ask for in a wall mount for multiple components. And with Cmple’s low price for this three-shelf unit, there’s no need to search for any other solution.
9U Wall Mount Server Cabinet As telecommunications needs continue to grow and expand, the physical space in which they exist does not always grow at the same rate. Cmple overcomes this hurdle by providing cabinets that allow you to create locations for cables and equipment where space is limited or does not exist. The wall mount data cabinet has been a popular choice for installers over the years because they meet the all-around, standard requirements of data installation.This 9U wall-mount enclosure from Cmple is the perfect solution to install, secure, and organize rack equipment in wiring rooms, corridors, communication areas, retail locations, and other locations with limited space. Wall-mounted cabinets are widely used because of their small size, easy installation and disassembly, easy management, and anti-theft features.Designed to exacting standards, this 9U wall mount cabinet offers a compact and secure containment system for your rackmount active and passive devices including switches, branch routers, telecom, and low-density cable patching. It has removable and lockable side panels for easy access and security and offers robust durability once installed. The vented slotted openings on the enclosure and locking doors help to keep equipment cool and secure. In short, Cmple offers one of the best value-for-money wall mount data cabinets ranges that are available on the market today.Features:Compatible with: Standard 19inch Wide EquipmentOptimized to save space in secure environmentsSuitable for wall mount or floor restricted areasMounting rails with #10-32 threaded EIA hole pattern (or Rails with cage nut style bolting)Removable side panels with security locks on both sidesThe vented design ensures a long life for your equipmentThere is a cable passage for cabling in the ceiling and baseThe door that can be installed to swing open either left or rightLockable front, rear doors, and side panels for added security16-inch depthMaterial: SPCC Cold Rolled SteelMax capacity: 132lbs (60kg)Dimensions: 23.6inchW x 19.8inchH x 17.70inchDColor: BlackPackage Includes:1 x 9U Wall Mount Cabinet (Unassembled)1 x 110V Fan3 x Lock With 2 Keys1 x 10-32 Assembly Kit Bag (Cage Nuts, Washers, Bolts)
3U Server Rack Drawer Add even more functionality to all of your 2 or 4-post open frame racks and wall-mount rack enclosures! This 3U locking rack mount drawer by Cmple installs and slides easily to add useful, secure storage to any standard 19-inch server rack, enclosure, or cabinet. The pre-installed lock ensures to safeguard from damage, theft, and tampering. These drawers are universal for customizing your setup more than you can expect. Designed for storage software, non-rack equipment, tools, user guides, cable management supplies, patch cables, and other gear that you need handy to get the job done right.The drawer itself is very stable, it is made of thick sheet metal with a black powder finish. Comes with a non-slip, perforated liner that provides a protective layer between electronic accessories and the drawer's metal surface. For fast installation, rack drawers ship fully assembled and include all necessary mounting hardware and keys.Features:Convenient and Secure StorageInstall easily into a standard 19-inch rack or cabinetKeep your workspace tidy and your equipment accessibleLocking design secures equipment and prevents tamperingDurable steel construction and smooth, reliable slidesDimensions: 5.24inchH x 19inchW x 14inchDMaterial: Cold Rolled SteelBlack Powder-Coated FinishMatch Rack and Enclosure ColorUp to 35 lbs Weight CapacityDeep: 13.8inch interior (14inch exterior)Package Includes:1 x 3U Lockable Rack-Mount Drawer4 x M6 Screws4 x M6 Cage Nuts2 x Key
2U Vented Server Rack Shelf Add even more functionality to all of your 2 or 4-post open frame racks and wall-mount rack enclosures! These fixed rack shelves are cantilevers, meaning they mount to the rack at only one end of the shelf. Make the most out of your open frame racks and wall-mount enclosures by customizing their configuration with this shelving wherever you need it.These 2 unit space server and rack case shelves are ideal for keeping your server or rack case clean and organized. Cmple shelf allows you to add space to open frame racks and wall-mount enclosures that accommodate tower UPS systems, monitors, or any other equipment that isn't rack-mount. The unit mounts easily in standard racks with the included hardware and provides space for non-rack mountable equipment.These shelves are universal for customizing your setup more than you can expect. In 2-post racks, two shelves can be mounted back-to-back to create a deep, fixed shelf. This shelf can be mounted upside down to fit a wider variety of needs for different types of electronic equipment. Vented openings can be used as lacing slots allow straps to be looped through to secure equipment to the shelf.Features:Takes up 2 Units of spaceCompatible with standard 19-inch racksThe vented design promotes air circulationUsed with 2â€Post, 4â€Post Racks, cabinets, and wall racksDimensions: 19inch W x 3.5inch H x 13.7inch DUsable shelf space: 18.6inch W x 13.3inch DMaterial: 18-Gauge SPCC Cold Roll SteelBlack Powder Coating FinishHolds up to 5.5lbs (2.5kg)Package Includes:1 x 2U Vented Rack-Mount Shelf4 x #12-24 Cage Nuts and Screws
2U Server Rack Drawer Add even more functionality to all of your 2 or 4-post open frame racks and wall-mount rack enclosures! This 2U locking rack mount drawer by Cmple installs and slides easily to add useful, secure storage to any standard 19-inch server rack, enclosure, or cabinet. The pre-installed lock ensures to safeguard from damage, theft, and tampering. These drawers are universal for customizing your setup more than you can expect. Designed for storage software, non-rack equipment, tools, user guides, cable management supplies, patch cables, and other gear that you need handy to get the job done right.The drawer itself is very stable, it is made of thick sheet metal with a black powder finish. Comes with a non-slip, perforated liner that provides a protective layer between electronic accessories and the drawer's metal surface. For fast installation, rack drawers ship fully assembled and include all necessary mounting hardware and keys.Features:Convenient and Secure StorageInstall easily into a standard 19-inch rack or cabinetKeep your workspace tidy and your equipment accessibleLocking design secures equipment and prevents tamperingDurable steel construction and smooth, reliable slidesDimensions: 3.5inchH x 19inchW x 14inchDMaterial: Cold Rolled SteelBlack Powder-Coated FinishMatch Rack and Enclosure ColorUp to 35 lbs Weight CapacityDeep: 13.8inch interior (14inch exterior)Package Includes:1 x 2U Lockable Rack-Mount Drawer4 x M6 Screws4 x M6 Cage Nuts2 x Key
1U Vented Server Rack Shelf Add even more functionality to all of your 2 or 4-post open frame racks and wall-mount rack enclosures! These fixed rack shelves are cantilevers, meaning they mount to the rack at only one end of the shelf. Make the most out of your open frame racks and wall-mount enclosures by customizing their configuration with this shelving wherever you need it.These 1 unit space server and rack case shelves are ideal for keeping your server or rack case clean and organized. Cmple shelf allows you to add space to open frame racks and wall-mount enclosures that accommodate tower UPS systems, monitors, or any other equipment that isn't rack-mount. The unit mounts easily in standard racks with the included hardware and provides space for non-rack mountable equipment.These shelves are universal for customizing your setup more than you can expect. In 2-post racks, two shelves can be mounted back-to-back to create a deep, fixed shelf. This shelf can be mounted upside down to fit a wider variety of needs for different types of electronic equipment. Vented openings can be used as lacing slots allow straps to be looped through to secure equipment to the shelf.Features:Takes up 1 Unit of spaceCompatible with standard 19-inch racksThe vented design promotes air circulationUsed with 2â€Post, 4â€Post Racks, cabinets, and wall racksDimensions: 19inch W x 1.75inch H x 13.7inch DUsable shelf space: 18.6inch W x 13.3inch DMaterial: 18-Gauge SPCC Cold Roll SteelBlack Powder Coating FinishHolds up to 4.4lbs (2.2kg)Package Includes:1 x 1U Vented Rack-Mount Shelf4 x #12-24 Cage Nuts and Screws
1U Server Rack Drawer Add even more functionality to all of your 2 or 4-post open frame racks and wall-mount rack enclosures! This 1U locking rack mount drawer by Cmple installs and slides easily to add useful, secure storage to any standard 19-inch server rack, enclosure, or cabinet. The pre-installed lock ensures to safeguard from damage, theft, and tampering. These drawers are universal for customizing your setup more than you can expect. Designed for storage software, non-rack equipment, tools, user guides, cable management supplies, patch cables, and other gear that you need handy to get the job done right.The drawer itself is very stable, it is made of thick sheet metal with a black powder finish. Comes with a non-slip, perforated liner that provides a protective layer between electronic accessories and the drawer's metal surface. For fast installation, rack drawers ship fully assembled and include all necessary mounting hardware and keys.Features:Convenient and Secure StorageInstall easily into a standard 19-inch rack or cabinetKeep your workspace tidy and your equipment accessibleLocking design secures equipment and prevents tamperingDurable steel construction and smooth, reliable slidesDimensions: 1.75inchH x 19inchW x 14inchDMaterial: Cold Rolled SteelBlack Powder-Coated FinishMatch Rack and Enclosure ColorUp to 35 lbs Weight CapacityDeep: 13.8inch interior (14inch exterior)Package Includes:1 x 1U Lockable Rack-Mount Drawer4 x M6 Screws4 x M6 Cage Nuts2 x Key
15U Open Frame Server Rack Are you running out of IT floor space? Do you need to accommodate rack-mount equipment at a remote location or branch office? Are you planning for future expansion? Our wall mount network racks are a space-saving way to mount networking equipment in network wiring closets, back offices, or anywhere where floor space is limited.This 15U open-frame wall rack has a feature-rich 2-post mounting design that makes it easy for IT technicians to install. The 16†of the usable depth of the rack also allows for mounting of shelves, accessories, and other equipment from different manufactures. They have a professional-looking steel construction with a sleek black design, which makes it is a strong and durable solution for your next network system.You can be confident that it can store different types of all standard 19inch equipment such as servers, storage, switches, routers, patch panels, telecommunications hardware, and other devices that fulfill the primary purpose of the IT installation. Racks also have applications that may not employ typical IT equipment, such as manufacturing, but the same general principles apply.Features:Compatible with: Standard 19inch Wide EquipmentOptimized to save space in secure environmentsMounting rails with #10-32 threaded EIA hole patternSuitable for wall mount or floor restricted areasMaterial: 16 Gauge SPCC Cold-Rolled SteelDimensions: 19.7inch W x 29.9inch H x 17.7inch DMaximum Capacity: 66 lbs. (30 kg)Black Powder Coating FinishPackage Includes:1 x 15U Open Frame Rack1 x Mounting Hardware
15U Server Rack Cabinet with Casters As telecommunications needs continue to grow and expand, the physical space in which they exist does not always grow at the same rate. Cmple overcomes this hurdle by providing cabinets that allow you to create locations for cables and equipment where space is limited or does not exist. The wall mount data cabinet has been a popular choice for installers over the years because they meet the all-around, standard requirements of data installation.This 15U wall-mount enclosure from Cmple is the perfect solution to install, secure, and organize rack equipment in wiring rooms, corridors, communication areas, retail locations, and other locations with limited space. If you want to use it as a floor unit the heavy-duty caster wheels under the rack will give you the ease of mobility around your office, studio, or even your house. Wall-mounted cabinets are widely used because of their small size, easy installation and disassembly, easy management, and anti-theft features.Designed to exacting standards, this 15U wall mount cabinet offers a compact and secure containment system for your rackmount active and passive devices including switches, branch routers, telecom, and low-density cable patching. It has removable and lockable side panels for easy access and security and offers robust durability once installed. The vented slotted openings on the enclosure and locking doors help to keep equipment cool and secure. In short, Cmple offers one of the best value-for-money wall mount data cabinets ranges that are available on the market today.Features:Compatible with: Standard 19inch Wide EquipmentOptimized to save space in secure environmentsSuitable for wall mount or floor restricted areasMaximum maneuverability with casters includedMounting rails with #10-32 threaded EIA hole pattern (or Rails with cage nut style bolting)Removable side panels with security locks on both sidesThe vented design ensures a long life for your equipmentThere is a cable passage for cabling in the ceiling and baseThe door that can be installed to swing open either left or rightLockable front, rear doors, and side panels for added security22.25-inch depthMaterial: SPCC Cold Rolled SteelMax capacity: 132lbs (60kg)Dimensions: 23.6inchW x 30.3inchH x 23.6inchDColor: BlackPackage Includes:1 x 15U Cabinet (Unassembled)1 x 110V Fan4 x Casters3 x Lock With 2 Keys1 x 10-32 Assembly Kit Bag (Cage Nuts, Washers, Bolts)
12U Open Frame Server Rack Are you running out of IT floor space? Do you need to accommodate rack-mount equipment at a remote location or branch office? Are you planning for future expansion? Our wall mount network racks are a space-saving way to mount networking equipment in network wiring closets, back offices, or anywhere where floor space is limited.This 12U open-frame wall rack has a feature-rich 2-post mounting design that makes it easy for IT technicians to install. The 16†of the usable depth of the rack also allows for mounting of shelves, accessories, and other equipment from different manufactures. They have a professional-looking steel construction with a sleek black design, which makes it is a strong and durable solution for your next network system.You can be confident that it can store different types of all standard 19inch equipment such as servers, storage, switches, routers, patch panels, telecommunications hardware, and other devices that fulfill the primary purpose of the IT installation. Racks also have applications that may not employ typical IT equipment, such as manufacturing, but the same general principles apply.Features:Compatible with: Standard 19inch Wide EquipmentOptimized to save space in secure environmentsMounting rails with #10-32 threaded EIA hole patternSuitable for wall mount or floor restricted areasMaterial: 16 Gauge SPCC Cold-Rolled SteelDimensions: 19.7inch W x 24.6inch H x 17.7inch DMaximum Capacity: 66 lbs. (30 kg)Black Powder Coating FinishPackage Includes:1 x 12U Open Frame Rack1 x Mounting Hardware
12U Wall Mount Server Cabinet As telecommunications needs continue to grow and expand, the physical space in which they exist does not always grow at the same rate. Cmple overcomes this hurdle by providing cabinets that allow you to create locations for cables and equipment where space is limited or does not exist. The wall mount data cabinet has been a popular choice for installers over the years because they meet the all-around, standard requirements of data installation.This 12U wall-mount enclosure from Cmple is the perfect solution to install, secure, and organize rack equipment in wiring rooms, corridors, communication areas, retail locations, and other locations with limited space. Wall-mounted cabinets are widely used because of their small size, easy installation and disassembly, easy management, and anti-theft features.Designed to exacting standards, this 12U wall mount cabinet offers a compact and secure containment system for your rackmount active and passive devices including switches, branch routers, telecom, and low-density cable patching. It has removable and lockable side panels for easy access and security and offers robust durability once installed. The vented slotted openings on the enclosure and locking doors help to keep equipment cool and secure. In short, Cmple offers one of the best value-for-money wall mount data cabinets ranges that are available on the market today.Features:Compatible with: Standard 19inch Wide EquipmentOptimized to save space in secure environmentsSuitable for wall mount or floor restricted areasMounting rails with #10-32 threaded EIA hole pattern (or Rails with cage nut style bolting)Removable side panels with security locks on both sidesThe vented design ensures a long life for your equipmentThere is a cable passage for cabling in the ceiling and baseThe door that can be installed to swing open either left or rightLockable front, rear doors, and side panels for added security??-inch depth, useable is ??-inchMaterial: SPCC Cold Rolled SteelMax capacity: 132lbs (60kg)Dimensions: 23.6inchW x 25inchH x 17.7inchDColor: BlackPackage Includes:1 x 12U Wall Mount Cabinet (Unassembled)1 x 110V Fan3 x Lock With 2 Keys1 x 10-32 Assembly Kit Bag (Cage Nuts, Washers, Bolts)
120mm Server Cabinet Fan Server rack enclosure fans are used to help facilitate airflow within the rack by adding ventilation where it is needed most. Rack fans can be mounted on cabinet doors, cabinet sides, and cabinet roofs. When adding enclosure fans to your server rack, be sure to use blanking panels for any gaps to maximize airflow.The Cmple Fan is an ideal accessory for maintaining a constant flow of air within your rack enclosures and server cabinets. Better airflow keeps your valuable rack components cool, helps boost system performance, and avoids costly equipment failures that can lead to downtime, damage, and data loss.Features:Keeps proper airflow circulationMade for your rack equipment to be safeCan be mounted to metal or wood, door and/or drawer panelsMounts easily by using the included hardwareUses permanently lubricated ball bearingsStandard AC Power connectionHave split capacitor motorsRated speed of 2600-3000RPMMaterial: Plastic Blade/Aluminum FrameDimensions: 120mm x 120mm x 38mmPackage Includes:1 x 120mm Fan
3U Server Rack Shelf (SHELF-15SSS-N) The servers deployed at data centers require particular management and handling to ensure that the overall system works efficiently. For this purpose, rack mount shelves are considered an essential accessory and allow you to accommodate both non-rack mount equipment and half-rack width equipment without getting tangled up in wires, providing easy access for maintenance. At 15 inches deep, this shelf unit is perfect for any custom network rack build. Great for in-studio work, on-stage performances, or even smaller home network solutions. It is easy to install, sturdy enough and comes at a very economical cost. This model is highly recommended!The max weight load capacity of this model is 75 lbs (34 kg), and it is fully compatible with all EIA/ECAâ€310â€E compliant 19-inch server racks and server shelves. Versatile and adaptable, this server rack shelf has multiple applications and can be installed in various locations.Constructed using SPCC commercial-grade cold-rolled steel with an adept look black powder-coat finish that ensures that they keep all edges. Smooth surfaces reduce the possibility of injury or wear on cable jackets. Ergonomic design and secure attaches ensure to take up minimal space for more equipment and wiring distribution options.Features:Takes up 3 Units SpaceCompatible with standard 19-inch racksHave solid bottom and singleâ€sided 15†deepUsed with 2â€Post, 4â€Post Racks, cabinets, and wall racksCompatible with standard 19-inch wide equipmentMaterial: 16-Gauge Cold Roll SteelColor: Black Powder CoatingMaximum capacity: 75lbs(34kg)Package Includes:1 x 3U 15inch Singleâ€Sided Rack Shelf with Solid Bottom8 x #12â€24 Mounting Screw
1U Server Rack Shelf (SHELF-14SSS-1U) The servers deployed at data centers require particular management and handling to ensure that the overall system works efficiently. For this purpose, rack mount shelves are considered an essential accessory and allow you to accommodate both non-rack mount equipment and half-rack width equipment without getting tangled up in wires, providing easy access for maintenance.At 14 inches deep, this shelf unit is perfect for any custom network rack build. Great for in-studio work, on-stage performances, or even smaller home network solutions. It is easy to install, sturdy enough and comes at a very economical cost. This model is highly recommended!The max weight load capacity of this model is 50 lbs (22.5 kg), and it is fully compatible with all EIA/ECAâ€310â€E compliant 19-inch server racks and server shelves. Versatile and adaptable, this server rack shelf has multiple applications and can be installed in various locations.Constructed using SPCC commercial-grade cold-rolled steel with an adept look black powder-coat finish that ensures that they keep all edges. Smooth surfaces reduce the possibility of injury or wear on cable jackets. Ergonomic design and secure attaches ensure to take up minimal space for more equipment and wiring distribution options.Features:Takes up 1 Unit SpaceCompatible with standard 19-inch racksHave solid bottom and singleâ€sided 14†deepUsed with 2â€Post, 4â€Post Racks, cabinets, and wall racksCompatible with standard 19-inch wide equipmentMaterial: 16-Gauge Cold Roll SteelColor: Black Powder CoatingMaximum capacity: 50lbs(22.5kg)Package Includes:1 x 1U 14inch Singleâ€Sided Rack Shelf with Solid Bottom8 x #12â€24 Mounting Screw
Voice/Data/Video Combo Module (VDVM-8D8P6V) The Wavenet combo module kit includes everything needed to manage and distribute a full range of telephone, networking, and antenna wiring. Designed to distribute data (Ethernet), voice (telephone), and video (Coax) services from a single structured wiring enclosure throughout the home. To install a structured wiring enclosure requires minimal electrical experience but with this kit, it's easy as possible. The module is integrated with a non-bridged CAT 6 data board with 8 RJ45 standard ports and 4-pair color-coded 110 IDC style punch-down connectors providing high-performance connectivity. PCB board design, without housing, offers the same performance. Can connect 8 ethernet lines to 8 ports on your internet router.The telephone module is used for adding up to 4 phone lines to 8 locations in your home. It supports up to 8 outlets for phone, fax, and other devices and features both an RJ31x security port. Phone lines are connected via color-coded 110 style punch-down connections.2GHz video module can support up to 6 locations and is designed for installation in a structured wiring enclosure. This splitter receives and distributes CATV, antenna, satellite, or modulated video signals for up to six analog or digital television sets.Keeps wires neat and clean and mounts seamlessly in all structured wiring enclosures. All modules feature a push-pin design for simple and easy installation.Features:Fits easily into a standard structured media enclosureCAT6 module supports up to 8 data connectionsPhone module adding up to 4 phone lines to 8 locations in your homeF-type splitter adding up to 6 video connectionsCompatible with T568A wiring standardMeets and exceed ANSI/TIA-568-CIdeal for home or small office usePackage Includes:1 x 8-Ports Telephone Module, with RJ-31X Port1 x 8-Ports CAT6 Data Module1 x 6-Ports 2GHz Video Splitter
2U Server Rack Doubleâ€Sided Vented Shelf (SHELF-25DDV-N) The servers deployed at data centers require particular management and handling to ensure that the overall system works efficiently. In a cluttered rack, space is an urgent necessity. By utilizing a double-sided shelf you can increase not only the room but also the weight capacity of your shelf. This is a must-have for anyone with a rack that needs space extension.At 25 inches deep from edge to edge, this vented shelf unit is perfect for any custom network rack build. Great for in-studio work, on-stage performances, or even smaller home network solutions. It is easy to install, sturdy enough, and comes at a very economical cost. This model is highly recommended!The vented rackmount cantilever tray improves consistent airflow around devices on the shelf and within the rack to effectively dissipate heat on your equipment. Also, the max weight load capacity of this model is 110 lbs (50 kg), and it is fully compatible with all EIA/ECAâ€310â€E compliant 19-inch server racks and server shelves.Constructed using SPCC commercial-grade cold-rolled steel with an adept look black powder-coat finish that ensures that they keep all edges. Smooth surfaces reduce the possibility of injury or wear on cable jackets. Ergonomic design and secure attaches ensure to take up minimal space for more equipment and wiring distribution options.Features:Takes up 2 Units SpaceCompatible with standard 19-inch racksHave vented bottom and doubleâ€sided 25†deepCompatible with standard 19-inch wide equipmentUsed with 2â€Post, 4â€Post Racks, cabinets, and wall racksMaterial: 16-Gauge Cold Roll SteelColor: Black Powder CoatingMaximum capacity: 110 lbs (50 kg)Package Includes:1 x 2U 25inch Vented Bottom, Doubleâ€Sided Rack Shelf8 x #12â€24 Mounting Screw
