Mounts & Brackets
-
Dual Swivel Monitor Arm
3M(TM) Dual-Swivel Monitor Arm, MA140MB, Black
$234.97
-
Side-Mount Scanner Hol...
Side Mount Scanner Holder
$134.97
-
Dual Screen TV Ceiling...
The CM600BTB Dual TV Ceiling Mount is the ideal solution for retail or commercial AV setups. This versatile mount features back-to-back TV plates, allowing you to mount two panels in opposite directions. The pivoting mounting plate offers flexibility to mount onto flat, angled, or vertical surfaces. With a telescoping extension pole providing 23 of height adjustment and 360 rotation, you can position your screens precisely where you need them. The adjustable leveling screws and four discrete tilt options, with up to 15 forward or 6 backward tilt, ensure perfect screen alignment. Additionally, the mount includes unobstructed cable management along the entire length of the pole, keeping your installation clean and organized. BACK-TO-BACK SCREENS The back-to-back TV plates allow mounting of two panels in opposite directions, increasing visibility and ensuring content reaches a wider audience. FLEXIBLE MOUNTING OPTIONS The pivoting mounting plate secures the CM600BTB to a flat ceiling, angled ceiling or beam, or walls, expanding the possibilities for TV placement in any environment. ADJUSTABLE HEIGHT The telescoping extension pole provides height adjustment between 42.7 and 66.3 , ensuring perfect screen positioning. PERFECT SIGHTLINES With 360 swiveling and tilt options of 15 forward or 6 backward, the CM600BTB ensures content aligns perfectly with the audience s sightlines. CABLE MANAGEMENT The hollow core of the extension pole provides an unobstructed path for cable routing, while an opening in the mounting plate allows cables to continue through to the mounting surface, keeping them hidden and organized.
$299.99
-
Mobile Tablet St7 to 1...
Mobile tablet stand w/ wheels; 7" to 11"; tablet holder w/adjustable clamps from 6.6" to 7.8" in width; max thickness of 0.4"; up to 1.98lb - Ergonomic tablet stand fully adjustable by hand w/ 360 rotation / +280 tilt / 360 swivel; Height adjustability range of 36.4" to 57.8" from the floor; Detachable tablet holder - Stable base of 19.7" x 19.7" w/ durable lockable casters - Compatible w/ iPads/Samsung Galaxy Tab/Android Tablets/others - Easy assembly with one screw driver (not incl); TAA
$183.97
-
13.5in Laptop Privacy ...
Designed to fit past and current models of the Microsoft 13.5-inch Surface Book/Surface Laptop - Privacy filter darkens screen to protect sensitive data; Clear viewing angle of 60 (+/-30 ) - Filter won't interfere with webcams/sensors/closing the lid; Touchscreen enabled - Reduce eye strain by blocking up to 51% of blue light; Reversible laptop computer privacy screen with anti-glare matte sides - Light transmittance close to 60% - Attach the monitor privacy shield with included mounting tabs
$115.97
-
MPG MT201DR
Elevate Your Workspace with the MSI MPG MT201DR Premium RGB Dual Monitor Stand Arms. Experience the ultimate in ergonomic comfort and productivity with our fully adjustable heavy-duty gas spring mount. Perfect for monitors sized 17-35 inches, each arm boasts a capacity of 44 lbs per screen, ensuring stability and versatility. Compatible with VESA mounting standards (100x100 and 75x75), installation is a breeze with the quick-release plate. Enhance your setup with sleek gray aesthetics. Plus, enjoy peace of mind with our 3-year coverage.
$234.97
-
PC Wall Mount Bracket ...
Wall desktop mount is made from a heavy-duty powder-coated steel makes for a reliable wall mount for PC - Supports up to 40lb; Includes spacers for securing slim CPU chassis (SFF systems) in the PC wall mount bracket - Toolless adjustment from 1.9 to 7.8in of the CPU holder to accommodate various computer sizes/UPS battery backups - Free up desk/floor space by mounting the PC tower onto a nearby wall or on the side of a desk using this computer case wall mount.
$163.97
-
KIT, SINGLE MONITOR HA...
KITSINGLE MONITOR HANDLE BLK
$137.97
-
Triple Monitor Arm
Triple-Monitor Arm - Articulating Arms for Surround Setup - For 3 Monitors up to 24in - Steel - Tool-less Height Adjustment - VESA mount compatible
$319.97
-
Crossbar Dual Monitor ...
Double monitor VESA mount supports dual 27inch displays; Crossbar design - Built-in handles enable height adjustment from 9.6 to 15.7in; VESA plates enable toolless adjustments of +/-45 tilt;+/-40 swivel; 360 screen rotation; Monitors slide along crossbar - Durable aluminum construction; Anti-slip desk base for stability - Max 13.2lb (6kg) per VESA mount; Max capacity 26.4lb (12kg) - Adhesive clips & hook-and-loop ties for cable management; Standing column features cable pass-through.
$209.97
-
Desk Stand
The Kensington A1010 Telescoping Desk Stand is a professional desktop mount optimized for microphones, webcams, and lighting systems the perfect accessory for keeping your video conferencing setup organized and professional. The adjustable height stand accommodates different setup needs, the non-skid base prevents slipping, and a cable management clip supports a tidy workspace. The A1010 is part of Kensington s Professional Video Conferencing ecosystem- a powerfully cohesive plug & play software and accessory experience that empowers you to spend more time collaborating and less time troubleshooting.
$103.97
-
SV Drawer Travel Stop,...
SV Drawer Travel Stop 4 5 row
$100.97
-
PATIENT ROOM, VL18 STS...
PATIENT ROOM VL18 STS WM WHT
$1,216.97
-
StyleView Sit-Stand Co...
StyleView Sit Stand Combo WHT
$1,608.97
-
CPU Wall Cabinet Snow
CPU Wall Cabinet, Snow
$289.97
-
CareFit Combo Extender...
CareFit Combo Extender, Snow
$405.97
-
SIGNATURE PAD HLDR HRZNTL
SIGNATURE PAD HOLDER,HORIZONTAL T-SLOT MOUNT, ESW
$131.97
-
ADJUSTABLE WIPES HLDR ...
ADJUSTABLE WIPES HOLDER,T-SLOT MOUNT, ESW
$144.97
-
BIN w DIVIDERS HRZNTL ...
BIN WITH DIVIDERS,HORIZONTAL T-SLOT MOUNT, ESW
$119.97
-
DOCUMENT SCANNER HLDR ESW
DOCUMENT SCANNER HOLDER, ESW
$144.97
-
CORDED SCANNER HLDR HR...
CORDED SCANNER HOLDER,HORIZONTAL T-SLOT MOUNT, ESW
$144.97
-
SLOTTED SHELF HRZNTL T...
SLOTTED SHELF,HORIZONTAL T-SLOT MOUNT, ESW
$144.97
-
LX Pole Collar
LX Pole Collar
$81.97
-
Ergotron NX Monitor Ar...
Ergotron NX Monitor Arm White
$211.97
-
Wire Trak On A Roll 3/...
Premiere Raceway WireTrack 1125 Raceway On A Roll, 3/4inch H x 1-1/2inch W, 50 Foot, White Low profile and paintable surface allow this surface mount raceway to be used on installations where minimum presence is required. Just rollout the length you need, cut with ordinary scissors, and fold into a rigid channel shape. Then remove the tape backing and apply to clean dry surface. Load wires or cable and snap shut. 4 sizes. Knowing that up to 100 feet of raceway packed in a box the size of a pizza box is always on hand is comforting also. Features: Folds into a rigid PVC channel for wire or cable installations Easy storage for up to 50 ft. of raceway Low cost - High quality Perfect for around windows and doors Adhesive backing for fast-easy installation UL94VO Rated - flame retardant PVC Latex Paintable Installation Guide:Step 1Lay out and check over installation plan before sticking in place. Measure how much cable you want to cover. (Remember to apply the WireTrak to clean, dry surfaces.)Step 2Fold back approximately 1 inch of adhesive liner on an angle exposing liner from under Wire Trak on both ends and place in position to check alignment. Once in correct position, slowly remove balance of adhesive liner from under the Wire Trak. Press into position. Step 3Push the side of raceway to release the lock and open. Load wire and snap the cover closed. Use accessories to complete layout. The basic installation requires no tools. Wire Trak can be cut using hacksaw with fine-tooth blade. Wire Trak may be painted.
$321.49 $257.19
-
Wire Trak On A Roll 3/...
Wire Trak FE000375RFW50 Raceway On A Roll, 3/4inch H x 1/2inch W, 50 Foot Roll, White Low profile and paintable surface allow this surface mount raceway to be used on installations where minimum presence is required. Just rollout the length you need, cut with ordinary scissors, and fold into a rigid channel shape. Then remove the tape backing and apply to clean dry surface. Load wires or cable and snap shut. 4 sizes. Knowing that up to 100 feet of raceway packed in a box the size of a pizza box is always on hand is comforting also. Features: Folds into a rigid PVC channel for wire or cable installations Easy storage for up to 50 ft. of raceway Low cost - High quality Perfect for around windows and doors Adhesive backing for fast-easy installation UL94VO Rated - flame retardant PVC Latex Paintable Installation Guide:Step 1Lay out and check over installation plan before sticking in place. Measure how much cable you want to cover. (Remember to apply the WireTrak to clean, dry surfaces.)Step 2Fold back approximately 1 inch of adhesive liner on an angle exposing liner from under Wire Trak on both ends and place in position to check alignment. Once in correct position, slowly remove balance of adhesive liner from under the Wire Trak. Press into position. Step 3Push the side of raceway to release the lock and open. Load wire and snap the cover closed. Use accessories to complete layout. The basic installation requires no tools. Wire Trak can be cut using hacksaw with fine-tooth blade. Wire Trak may be painted.
$179.28 $143.42
-
Wire Trak On A Roll 1/...
Wire Track On A Roll 1/2inch H x 1inch W - 50 FT, White, Raceway, Cable Management Low profile and paintable surface allow this surface mount raceway to be used on installations where minimum presence is required. Just rollout the length you need, cut with ordinary scissors, and fold into a rigid channel shape. Then remove the tape backing and apply to clean dry surface. Load wires or cable and snap shut. 4 sizes. Knowing that up to 100 feet of raceway packed in a box the size of a pizza box is always on hand is comforting also. Features: Folds into a rigid PVC channel for wire or cable installations Easy storage for up to 50 ft. of raceway Low cost - High quality Perfect for around windows and doors Adhesive backing for fast-easy installation UL94VO Rated - flame retardant PVC Latex Paintable Installation Guide:Step 1Lay out and check over installation plan before sticking in place. Measure how much cable you want to cover. (Remember to apply the WireTrak to clean, dry surfaces.)Step 2Fold back approximately 1 inch of adhesive liner on an angle exposing liner from under Wire Trak on both ends and place in position to check alignment. Once in correct position, slowly remove balance of adhesive liner from under the Wire Trak. Press into position. Step 3Push the side of raceway to release the lock and open. Load wire and snap the cover closed. Use accessories to complete layout. The basic installation requires no tools. Wire Trak can be cut using hacksaw with fine-tooth blade. Wire Trak may be painted.
$204.58 $163.66
-
Wire Trak Joint Cover ...
Wire Trak Joint Cover for Raceway PVC White, 1 1/2inch W x 3/4inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Color: white
$32.23 $25.78
-
Wire Trak Inside Corne...
Wire Trak FMIN375-W .75 inch wide x .5 inch high white inside corner easily snaps on to the Wire Trak raceway channel. Holds up to 4 category 5e CMR cables Features: Provides a one inch minimum bend radius for C5e, C6 and fiber optic installations. Provides a functional, affordable, attractive solution for cable enclosure applications in commercial, industrial and residential environments. Parts are made from UL-94 compliant PVC. All products are paintable.
$33.78 $27.02
-
Wire Trak Inside Corne...
Wire Trak Inside Corner for Raceway PVC White, 1inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Color: white
$34.60 $27.68
-
Wire Trak Flat Elbow f...
Wire Trak Flat Elbow for Raceway PVC White, 3/4inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
$31.21 $24.97
-
Wire Trak Corner Duct ...
Wire Trak Corner Duct Raceway 2-3/16inch - 6ft FE0201150CD-W - White Triangular corner raceway blends into wall/ceiling junctions to provide clean, finished appearance. Parts made from a UL VO-94 compliant PVC. Comes with pre-applied foam tape for speedy installation.
$53.93 $43.14
-
Wire Trak 1-Piece Latc...
Wire Trak 1-Piece Latching Raceway PVC White 1 1/2inch W x 3/4inch H x 72inch L - 6FT The Latching Duct Raceway System is an economical alternative to many two-piece solutions. It is designed with a flexible living hinge allowing for multiple adds/moves/changes as your wiring requirements change. This Latching Duct system is compatible with the accessory components of the two-piece WireHider System. It comes complete with a solvent based curing adhesive foam tape on the back for secure adhesion to the wall. It is easy to install, and it eliminates the need to stock both channel and cover lids as required by most two-piece systems. Features: Economical One-Piece Latching System Compatible with Accessories Constructed of UL94V0 Flame Retardant PVC Built with UV Stabilizer to Prevent Color Fading Latex Paintable PVC Surface Adhesive Foam Tape for Fast & Easy Installation Duct Cutting Tool (Sold separately)
$72.05 $57.64
-
Wire Trak 1-Piece Latc...
Wire Trak 1-Piece Latching Raceway PVC White - 1inch W x 1/2inch H x 72inch L - 6FT The Latching Duct Raceway System is an economical alternative to many two-piece solutions. It is designed with a flexible living hinge allowing for multiple adds/moves/changes as your wiring requirements change. This Latching Duct system is compatible with the accessory components of the two-piece WireHider System. It comes complete with a solvent based curing adhesive foam tape on the back for secure adhesion to the wall. It is easy to install, and it eliminates the need to stock both channel and cover lids as required by most two-piece systems. Features: Economical One-Piece Latching System Compatible with Accessories Constructed of UL94V0 Flame Retardant PVC Built with UV Stabilizer to Prevent Color Fading Latex Paintable PVC Surface Adhesive Foam Tape for Fast & Easy Installation Duct Cutting Tool (Sold separately)
$55.88 $44.70
-
White Decora Wall Plat...
Four-Gang White Decoro Wall Plate Decorator-Style Flush Wall Plates Smooth Finish High-Impact ABS Plastic Includes color-matched mounting screws UL Listed Ideal for switches and receptacles
$38.04 $30.43
-
White Decora Wall Plat...
Dual-Gang White Decoro Wall Plate Decorator-Style Flush Wall Plates Smooth Finish High-Impact ABS Plastic Includes color-matched mounting screws UL Listed Ideal for switches and receptacles
$30.78 $24.62
-
Wall Plate Jacks 6P4C ...
Wall Plate Jacks 6P4C Single White Telephone wall plate with RJ11 connector. Single Jack wall plate for connecting telephone lines Accept phone cords with RJ11 connector with 4 conductors (2 lines) Color coded Screw on type line connectors on back
$29.68 $23.74
-
Speaker Wall Plate Wit...
Speaker Wall Plate With High-Quality Banana Binding Posts – Four Speakers The one “look†that defines most young people’s apartments (other than overall sloppiness) could very well be the wires running across the floor from their TV or audio receiver to their speakers. After all, when you’re probably not going to live somewhere very long – and when you’ve got friends to see and partying to do – who has time to worry about running wires carefully in order to make everything look nice and neat? You’re not living in your first apartment anymore and a mess of wires all over the place is no longer a sign of youth, it’s a sign of either laziness or carelessness. Either way, it’s not the way that an adult’s home should look to visitors, whether they’re family who will shrug off your lack of attention to detail as just “business the usual,†or friends and co-workers (or even a boss) who may draw unwanted conclusions from your messy home. These Cmple two-piece (a base with the posts, and an attractive white cover) wall plates are no larger than a regular AC outlet and are designed to work with banana plugs (front and back), but can easily be used with spades or bare wire if you’d like. With eight posts on each plate, you just have to screw stereo cables and you’ve got four speakers properly connected with absolutely no mess. All of the connectors, front and back, are gold-plated to prevent any corrosion which might develop over time, and to eliminate any audio noise which can be created by poor connections. There’s nothing simpler than using these wall plates; no soldering is required, and all you have to do is mount the plate and screw on the cables. Job done. A closer look at the specs for the Cmple Four-Speakers Wall Plate With High-Quality Banana Binding Posts: Can be used with banana plugs, spades or bare wire Same type of connectors, front and back No soldering required Corrosion-resistant gold-plated connectors Eight Posts to accommodate Four Speakers Dimensions: 2 ¾ inches x 4 ½ inches When you want your home to look like a grown-up lives in it, new furniture and carpet can cost a lot of money. Cmple wall plates which will allow you to get your speaker cable off the floor cost less than five dollars apiece. They’re a great place to start.
$60.36 $48.29
-
Dual Coaxial F-Connect...
2-Port F Connector Wall Plate Dual-Gang Modular CATV Wall-Plate Dual-Gang 2-Port Suitable for common CATV Applications Mounts in standard Electrical Box or Low-Voltage Mounting Plate F/F feed-thru coupler High-Impact ABS Plastic Mounting Bracket Color - White
$29.98 $23.98
-
DataComm 45-0031-WH Re...
Wall Plate - Recessed Media Plate with Duplex Receptacle, White Recessed Low Voltage Media Plate with Duplex Receptacle offers the convenience of a duplex receptacle and a recessed plate with enough room to store the low voltage cables behind your flat panel TV. Low profile design fits behind the industry's thinnest mounts and TV' Conceal multiple AV cables behind your flat panel TV 15 Amp/125 Volt tamper resistant, duplex receptacle Mounting wings are molded into the media plate and fasten tightly against the back of the drywall Quick and easy to install - No additional parts needed
$88.83 $71.06
-
DataComm 45-0021-GY Re...
Recessed Low-Voltage Cable Wall Plate With Recessed Power – Gray Cmple offers many innovative products to let your home theater, audio/visual system and internet network perform at their best while also helping your living spaces to look their best. A perfect example is this unusual but extremely well-designed wall plate, which combines a recessed AC power outlet next to a recessed opening for multiple low-voltage cables, all in one beautiful gray package which will blend in perfectly with its surroundings. You can probably already visualize one or two places where this product would be particularly handy in your home. For example, it can go behind your high-definition television so the TV plugs into the wall and input cables from your audio system, Blu-ray player and other components can be fed through right next to the AC power; or HDMI cables from the television can be fed out through the plate and into the wall, since the opening will accommodate as many as four or five thick HDMI cables. Or you can have the same type of setup behind your audio receiver to handle not only all of the input cables from components, but those going out to your TV and speakers. Installing this two-gang wall plate – which would probably become a conversation piece if it weren’t so unobtrusive – is surprisingly simple. In fact, you can just take out an existing two-gang wall outlet and install this one in its place. If you’re placing it where there’s currently a one-gang power outlet, all you have to do is remove the old one and cut the drywall so the new wall plate fits right into place; no additional wiring is necessary. As you can tell from its name, this is a recessed plate so any power cable will fit snugly into it; there’s also a convenient conduit behind the plate so all of the low-voltage cables being fed in or out of the opening can be managed easily and no one will be able to see drywall or insulation behind the wall plate. And it can be installed “right side up†or “upside down,†whichever is more convenient. A look at the specifications of the Cmple recessed low-voltage cable wall plate with recessed power: Cables pass through the conduit/hole opening on plate face; capacity 4-5 thick HDMI cables Cable opening: 1 5/16 inches wide,1 15/16 inches high Overall dimensions: 5 ¼ inches wide, 4 ½ inches high, 2 ¾ inches deep Color: Gray, matching gray screws included Comes with installation manual Grounded power receptacle, manufactured by Coope
$76.20 $60.96
-
DataComm 45-0015-WH Tw...
Cable Plate With Flexible Opening, Two Gang – White Now this is a cool product. Everyone knows that running cables through the wall is the best way to ensure a professional, impressive home theater setup. But everyone who’s done it knows that you’re sure to run into one of two vexing problems: 1. If you have multiple cables terminating at the same place, how do you neatly bring them through the wall without leaving a huge opening around them? 2. If you somehow manage to cut the hole to exactly the correct size for the cables, what happens when you buy a new component and have new cables to add? That’s why we say (with all modesty) that the Cmple cable plate with flexible opening is a cool product. Here’s how it works. The center portion of the standard-sized two-gang plate is constructed from durable but flexible plastic, which opens just enough to allow as many as six low-voltage cables to fit through and then closes around them. You wind up with a beautiful, professional-looking wall plate with the cables looking as if the plate was built to hold them – and no gaps or spaces anywhere. It won’t detract from the look of your room and there’s no way that cold or hot air (or, although we hate to even mention it, unwelcome little crawly friends) can get through. The plate even has mounting wings molded into its construction, for easy and secure attachment to the back of the drywall. You don’t need mounting plates, o-rings, gaskets or any other parts; they cable plate is simple to install with just two screws. These plates are white in color, but we also sell them in black, ivory and almond. They have a low profile design, so they’ll fit on any wall without standing out and can fit behind virtually any HDTVs or TV mounts easily. Whether you’re feeding a number of low-voltage inputs from components located throughout the room, or feeding speaker cables out from your audio amplifier to speakers in all corners of the space, this plate lets you run cables through the wall and take care of the “messy cable†issue in an elegant way. Checking out the important specifications of the Cmple two-gang cable plate with flexible opening: Low-profile design fits behind the industry’s thinnest mounts and TV's Conceals multiple low-voltage cables behind your flat panel TV: Two gang plate, holds up to six cables Color: white Quick and easy installation, no additional parts necessary Mounting wings molded into the plate and fasten tightly against the back of the drywall Center portion of cable plate made of flexible plastic allowing multiple cables to pass through the plate No low voltage mounting plate or o-ring required
$47.05 $37.64
-
DataComm 45-0014-IV On...
Cable Plate With Flexible Opening, One Gang – Ivory Now this is a cool product. Everyone knows that running cables through the wall is the best way to ensure a professional, impressive home theater setup. But everyone who’s done it knows that you’re sure to run into one of two vexing problems: 1. If you have multiple cables terminating at the same place, how do you neatly bring them through the wall without leaving a huge opening around them? 2. If you somehow manage to cut the hole to exactly the correct size for the cables, what happens when you buy a new component and have new cables to add? That’s why we say (with all modesty) that the Cmple cable plate with flexible opening is a cool product. Here’s how it works. The center portion of the standard-sized one-gang plate is constructed from durable but flexible plastic, which opens just enough to allow as many as six low-voltage cables to fit through and then closes around them. You wind up with a beautiful, professional-looking wall plate with the cables looking as if the plate was built to hold them – and no gaps or spaces anywhere. It won’t detract from the look of your room and there’s no way that cold or hot air (or, although we hate to even mention it, unwelcome little crawly friends) can get through. The plate even has mounting wings molded into its construction, for easy and secure attachment to the back of the drywall. You don’t need mounting plates, o-rings, gaskets or any other parts; they cable plate is simple to install with just two screws. These plates are ivory in color, but we also sell them in black, light almond and white. They have a low profile design, so they’ll fit on any wall without standing out and can fit behind virtually any HDTVs or TV mounts easily. Whether you’re feeding a number of low-voltage inputs from components located throughout the room, or feeding speaker cables out from your audio amplifier to speakers in all corners of the space, this plate lets you run cables through the wall and take care of the “messy cable†issue in an elegant way. Checking out the important specifications of the Cmple one-gang cable plate with flexible opening: Low-profile design fits behind the industry’s thinnest mounts and TV's Conceals multiple low-voltage cables behind your flat panel TV: One gang plate, holds up to six cables Color: ivory Quick and easy installation, no additional parts necessary Mounting wings molded into the plate and fasten tightly against the back of the drywall Center portion of cable plate made of flexible plastic allowing multiple cables to pass through the plate No low voltage mounting plate or o-ring required
$44.41 $35.53
-
DataComm 45-0014-BK On...
Cable Plate With Flexible Opening, One Gang – Black Now this is a cool product. Everyone knows that running cables through the wall is the best way to ensure a professional, impressive home theater setup. But everyone who’s done it knows that you’re sure to run into one of two vexing problems: 1. If you have multiple cables terminating at the same place, how do you neatly bring them through the wall without leaving a huge opening around them? 2. If you somehow manage to cut the hole to exactly the correct size for the cables, what happens when you buy a new component and have new cables to add? That’s why we say (with all modesty) that the Cmple cable plate with flexible opening is a cool product. Here’s how it works. The center portion of the standard-sized one-gang plate is constructed from durable but flexible plastic, which opens just enough to allow as many as six low-voltage cables to fit through and then closes around them. You wind up with a beautiful, professional-looking wall plate with the cables looking as if the plate was built to hold them – and no gaps or spaces anywhere. It won’t detract from the look of your room and there’s no way that cold or hot air (or, although we hate to even mention it, unwelcome little crawly friends) can get through. The plate even has mounting wings molded into its construction, for easy and secure attachment to the back of the drywall. You don’t need mounting plates, o-rings, gaskets or any other parts; they cable plate is simple to install with just two screws. These plates are black in color, but we also sell them in ivory, light almond and white. They have a low profile design, so they’ll fit on any wall without standing out and can fit behind virtually any HDTVs or TV mounts easily. Whether you’re feeding a number of low-voltage inputs from components located throughout the room, or feeding speaker cables out from your audio amplifier to speakers in all corners of the space, this plate lets you run cables through the wall and take care of the “messy cable†issue in an elegant way. Checking out the important specifications of the Cmple one-gang cable plate with flexible opening: Low-profile design fits behind the industry’s thinnest mounts and TV's Conceals multiple low-voltage cables behind your flat panel TV: One gang plate, holds up to six cables Color: black Quick and easy installation, no additional parts necessary Mounting wings molded into the plate and fasten tightly against the back of the drywall Center portion of cable plate made of flexible plastic allowing multiple cables to pass through the plate No low voltage mounting plate or o-ring required
$43.01 $34.41
-
DataComm 45-0010-WH R...
Recessed Media Box, White Use The Recessed Media Box to install power and low voltage cables from behind your flat panel TV, your amplifier or other audio and video devices to your equipment room or use in your equipment room to organize your incoming audio and video cables. This box is designed for new construction or retrofit installations. The 4-gang flexible cover plate gives the box the clean, finished look customers expect. Available with either a white or black cover plate. Box inner dimensions: 3 13/16" x 5" x 7" Contents: Recessed Media Box Wall Plate Wall Plate Screws (4) Retrofit Mounting Tabs (4) Retrofit MountingWings with Screws (4) Black Foam Tape #6 Wood Screws (2) Small Threaded Screws (4) Screwdriver
$98.34 $78.67
-
DataComm 45-0010-BK Re...
Recessed Media Box, Black Use The Recessed Media Box to install power and low voltage cables from behind your flat panel TV, your amplifier or other audio and video devices to your equipment room or use in your equipment room to organize your incoming audio and video cables. This box is designed for new construction or retrofit installations. The 4-gang flexible cover plate gives the box the clean, finished look customers expect. Available with either a white or black cover plate. Box inner dimensions: 3 13/16" x 5" x 7" Contents: Recessed Media Box Wall Plate Wall Plate Screws (4) Retrofit Mounting Tabs (4) Retrofit MountingWings with Screws (4) Black Foam Tape #6 Wood Screws (2) Small Threaded Screws (4) Screwdriver
$98.34 $78.67
-
DataComm 45-0009-WH Re...
Wall Plate - Recessed Easy Mount Low Voltage Cable, Slim Fit - White The Slim-Fit version of the Easy Mount Recessed Cable Plate is designed for use in homes with concrete foundations. Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The wall plate can be installed upright or upside down. This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate-in a single gang profile. The wall plate can be installed upright or upside down. Total dimensions: 4.9" (L) x 3.25" (W) x 1.5" (D) (D) Cable passthrough dimensions: 1.75" (L) x .75" (W) Color: White
$38.86 $31.09
-
DataComm 45-0008-WH Re...
Wall Plate - Recessed Easy Mount Low Voltage Cable -Â White Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The wall plate can be installed upright or upside down. This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate-in a single gang profile. The wall plate can be installed upright or upside down. The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat panel TVs. Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D) Cable passthrough dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D) Maximum wall thickness for installation: 1 inch Minimum wall thickness for installation: 0.25 inch Color:Â White
$38.86 $31.09
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"