Wall Plate - Recessed Easy Mount Low Voltage Cable -Â White
Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The wall plate can be installed upright or upside down.
This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate-in a single gang profile. The wall plate can be installed upright or upside down.
The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat panel TVs.
Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D)
Cable passthrough dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D)
Maximum wall thickness for installation: 1 inch
Minimum wall thickness for installation: 0.25 inch
Color:Â White
Wall Plate - Recessed Easy Mount Low Voltage Cable -Â Almond
Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The wall plate can be installed upright or upside down.
This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate-in a single gang profile. The wall plate can be installed upright or upside down.
The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat panel TVs.
Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D)
Cable passthrough dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D)
Maximum wall thickness for installation: 1 inch
Minimum wall thickness for installation: 0.25 inch
Color:Â Almond
Wall Plate - Recessed Easy Mount Low Voltage Cable - Black
Use the Easy Mount Recessed Low Voltage Cable Plate to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. The wall plate can be installed upright or upside down.
This plate's innovative "mounting wings" eliminate the need for a low voltage mounting bracket. The mounting wings are molded into the Easy Mount wall plate and fasten tightly against the back of the drywall. The standard Easy Mount Cable Plate has the capacity of a double gang plate-in a single gang profile. The wall plate can be installed upright or upside down.
The new, thinner profile of the Easy Mount Cable Plate is designed to fit behind the industry's thinnest mounts and flat panel TVs.
Total dimensions: 4.9" (L) x 3.25" (W) x 2.25" (D)
Cable passthrough dimensions: 2.5" (L) x 1.5" (W) x 2.25" (D)
Maximum wall thickness for installation: 1 inch
Minimum wall thickness for installation: 0.25 inch
Color: Black
Three-Gang Recessed Low Voltage Cable – White
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our three-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple three-gang low-voltage recessed cable wall plate:
Three gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: White with matching screws
Installing a beautiful home theater or audio system requires you to give as much thought to the details as you do to the components. This wall plate is a small detail, but the effect it will have on the look of your finished room is enormous.
Two-Gang Recessed Low Voltage Cable – White
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our two-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple two-gang low-voltage recessed cable wall plate:
Two gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: White with matching screws
Two-Gang Recessed Low Voltage Cable – Lite Almond
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our two-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple two-gang low-voltage recessed cable wall plate:
Two gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: Lite Almond with matching screws
Two-Gang Recessed Low Voltage Cable – Brown
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our two-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple two-gang low-voltage recessed cable wall plate:
Two gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: Brown with matching screws
Two-Gang Recessed Low Voltage Cable – Black
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our two-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple two-gang low-voltage recessed cable wall plate:
Two gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: Black with matching screws
One-Gang Recessed Low Voltage Cable – White
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our one-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple one-gang low-voltage recessed cable wall plate:
One gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: White with matching screws
One-Gang Recessed Low Voltage Cable – Lite Almond
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our one-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple one-gang low-voltage recessed cable wall plate:
One gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: Lite Almond with matching screws
One-Gang Recessed Low Voltage Cable – Ivory
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our one-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple one-gang low-voltage recessed cable wall plate:
One gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: Ivory with matching screws
One-Gang Recessed Low Voltage Cable – Brown
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our one-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple one-gang low-voltage recessed cable wall plate:
One gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: Brown with matching screws
One-Gang Recessed Low Voltage Cable – Black
You’ve decided that you want to go all the way with your home theater or surround sound audio system, with high-quality components and all of the wiring run through the walls. Not only will the video and sound be impressive, but just walking into the room will inspire a feeling of awe because of the gorgeous equipment and the intelligent, effective layout. Everyone will be convinced that a professional designed and installed the entire thing.
But what do you do with all of those cables?
The more complicated the system, the more cables you have connecting all of the video and audio inputs and outputs. Sure, the bulk of the cabling will be running through your walls, but that still means a dozen (or more) of them will be poking out of the wall in various spots, so they can connect to their respective components. The last thing you want is to have ugly holes where the cables emerge from (or disappear into) the walls, and you also don’t want to have to drill tons of holes to accommodate all of the different sizes of cable. It is, as the King of Siam once said, “a puzzlement.â€
You don’t need Anna to solve the “puzzlement†when Cmple is here to help with our one-gang recessed low-voltage cable wall plate. This plate attaches flush to your wall with an opening for low-voltage cables that’s approximately 1 ½ inches by 2 inches; you can feed multiple cables, of all different sizes, through the same opening. This provides the ultimate in versatility: an HDMI cable can be fed out through the plate to your wall-mounted monitor, while cables from a satellite or cable box, Blu-ray player, audio receiver, video gaming system and whatever else you have in your installation can all be fed in through the plate at the same time. It’s the ultimate in attractive flexibility.
One reason our Cmple low-voltage cable wall plate is so attractive is that the cable opening is recessed. In that way, the plate will remain flush to your wall while still allowing for different types and widths of cable to easily feed through without the “bumps†which can ruin the look of a room, and also letting you position your furniture or TV as close to the wall as you’d like. It adds the finished look so important to a professional installation; in fact, this is exactly what many professionals use to complete their high-priced work.
The other reason it’s so attractive is that it eliminates the need for a “police lineup†of cable plates across the wall. All of the low-voltage cabling fits right through the same plate, so you only need one to accomplish the job of several.
Taking a look at the key specifications for the Cmple one-gang low-voltage recessed cable wall plate:
One gang finished plate
Recessed opening for cables
Accommodates all types and sizes of low-voltage cables
Hole opening: 1 5/16 inches wide by 1 15/16 inches high
Color: Black with matching screws
1-Port F Connector Wall Plate Single-Gang
Modular CATV Wall-Plate
Single-Gang 1-Port
Suitable for common CATV Applications
Mounts in standard Electrical Box or Low-Voltage Mounting Plate
F/F feed-thru coupler
High-Impact ABS Plastic Mounting Bracket
Color - White
Cable Plate With Flexible Opening, Two Gang - Black Now this is a cool product. Everyone knows that running cables through the wall is the best way to ensure a professional, impressive home theater setup. But everyone who’s done it knows that you’re sure to run into one of two vexing problems: 1. If you have multiple cables terminating at the same place, how do you neatly bring them through the wall without leaving a huge opening around them? 2. If you somehow manage to cut the hole to exactly the correct size for the cables, what happens when you buy a new component and have new cables to add? That’s why we say (with all modesty) that the Cmple cable plate with flexible opening is a cool product. Here’s how it works. The center portion of the standard-sized two-gang plate is constructed from durable but flexible plastic, which opens just enough to allow as many as six low-voltage cables to fit through and then closes around them. You wind up with a beautiful, professional-looking wall plate with the cables looking as if the plate was built to hold them - and no gaps or spaces anywhere. It won’t detract from the look of your room and there’s no way that cold or hot air (or, although we hate to even mention it, unwelcome little crawly friends) can get through. The plate even has mounting wings molded into its construction, for easy and secure attachment to the back of the drywall. You don’t need mounting plates, o-rings, gaskets or any other parts; they cable plate is simple to install with just two screws. These plates are black in color, but we also sell them in ivory, almond and white. They have a low profile design, so they’ll fit on any wall without standing out and can fit behind virtually any HDTVs or TV mounts easily. Whether you’re feeding a number of low-voltage inputs from components located throughout the room, or feeding speaker cables out from your audio amplifier to speakers in all corners of the space, this plate lets you run cables through the wall and take care of the “messy cable†issue in an elegant way. Checking out the important specifications of the Cmple two-gang cable plate with flexible opening: Low-profile design fits behind the industry’s thinnest mounts and TV's Conceals multiple low-voltage cables behind your flat panel TV: Two gang plate, holds up to six cables Color: black Quick and easy installation, no additional parts necessary Mounting wings molded into the plate and fasten tightly against the back of the drywall Center portion of cable plate made of flexible plastic allowing multiple cables to pass through the plate No low voltage mounting plate or o-ring required It’s unlikely that anyone will even notice your Cmple flexible opening cable plates since they’re designed to blend into their surroundings. If someone does notice, though, they’ll probably tell you that they’ve never seen anything like them before - and that they’re very cool. Remember who told you that first.
SPEAKER WIRE WALL PLATE with female ports on both sides can connect to speaker cable concealed behind the wall; Connect a speaker to the ideal location with an available wall plate or by adding a new outlet COMPATIBLE with regular speaker wire and banana plugs. This audio wall plates fit an existing standard single-gang outlet or low voltage bracket. Connects a single speaker. EASY TO INSTALL: Makes easy work of installing in-wall speakers. Binding post terminals on speaker wall plate have red and black ring labels on both sides for easy identification HIGH QUALITY: Gold-plated, corrosion-resistant binding posts for lasting use. Home theater wall plates with gold-plated binding post connectors provide a reliable connection and distribute authentic audio PACKAGE INCLUDE: 1 x Speaker Wall Plate with 2 binding posts for one speaker. Includes mounting screws Speaker Wall Plate With High-Quality Banana Binding Posts - One Speaker The one “look†that defines most young people’s apartments (other than overall sloppiness) could very well be the wires running across the floor from their TV or audio receiver to their speakers. After all, when you’re probably not going to live somewhere very long - and when you’ve got friends to see and partying to do - who has time to worry about running wires carefully in order to make everything look nice and neat? You’re not living in your first apartment anymore and a mess of wires all over the place is no longer a sign of youth, it’s a sign of either laziness or carelessness. Either way, it’s not the way that an adult’s home should look to visitors, whether they’re family who will shrug off your lack of attention to detail as just “business the usual,†or friends and co-workers (or even a boss) who may draw unwanted conclusions from your messy home. These Cmple two-piece (a base with the posts, and an attractive white cover) wall plates are no larger than a regular AC outlet and are designed to work with banana plugs (front and back), but can easily be used with spades or bare wire if you’d like. With two posts on each plate, you just have to screw stereo cable and you’ve got one speaker properly connected with absolutely no mess. All of the connectors, front and back, are gold-plated to prevent any corrosion which might develop over time, and to eliminate any audio noise which can be created by poor connections. There’s nothing simpler than using these wall plates; no soldering is required, and all you have to do is mount the plate and screw on the cables. Job done. A closer look at the specs for the Cmple One-Speaker Wall Plate With High-Quality Banana Binding Posts: Can be used with banana plugs, spades or bare wire Same type of connectors, front and back No soldering required Corrosion-resistant gold-plated connectors Two Posts to accommodate One Speaker Dimensions: 2 ¾ inches x 4 ½ inches When you want your home to look like a grown-up lives in it, new furniture and carpet can cost a lot of money. Cmple wall plates which will allow you to get your speaker cable off the floor cost less than five dollars apiece. They’re a great place to start.
Speaker Wall Plate With High-Quality Banana Binding Posts - Five Speakers The one “look†that defines most young people’s apartments (other than overall sloppiness) could very well be the wires running across the floor from their TV or audio receiver to their speakers. After all, when you’re probably not going to live somewhere very long - and when you’ve got friends to see and partying to do - who has time to worry about running wires carefully in order to make everything look nice and neat? You’re not living in your first apartment anymore and a mess of wires all over the place is no longer a sign of youth, it’s a sign of either laziness or carelessness. Either way, it’s not the way that an adult’s home should look to visitors, whether they’re family who will shrug off your lack of attention to detail as just “business the usual,†or friends and co-workers (or even a boss) who may draw unwanted conclusions from your messy home. These Cmple two-piece (a base with the posts, and an attractive white cover) wall plates are no larger than a regular AC outlet and are designed to work with banana plugs (front and back), but can easily be used with spades or bare wire if you’d like. With ten posts on each plate, you just have to screw stereo cables and you’ve got five speakers properly connected with absolutely no mess. All of the connectors, front and back, are gold-plated to prevent any corrosion which might develop over time, and to eliminate any audio noise which can be created by poor connections. There’s nothing simpler than using these wall plates; no soldering is required, and all you have to do is mount the plate and screw on the cables. Job done. A closer look at the specs for the Cmple Five-Speakers Wall Plate With High-Quality Banana Binding Posts: Can be used with banana plugs, spades or bare wire Same type of connectors, front and back No soldering required Corrosion-resistant gold-plated connectors Ten Posts to accommodate Five Speakers Dimensions: 2 ¾ inches x 4 ½ inches When you want your home to look like a grown-up lives in it, new furniture and carpet can cost a lot of money. Cmple wall plates which will allow you to get your speaker cable off the floor cost less than five dollars apiece. They’re a great place to start.
Cable Plate With Flexible Opening, One Gang - White Now this is a cool product. Everyone knows that running cables through the wall is the best way to ensure a professional, impressive home theater setup. But everyone who’s done it knows that you’re sure to run into one of two vexing problems: 1. If you have multiple cables terminating at the same place, how do you neatly bring them through the wall without leaving a huge opening around them? 2. If you somehow manage to cut the hole to exactly the correct size for the cables, what happens when you buy a new component and have new cables to add? That’s why we say (with all modesty) that the Cmple cable plate with flexible opening is a cool product. Here’s how it works. The center portion of the standard-sized one-gang plate is constructed from durable but flexible plastic, which opens just enough to allow as many as six low-voltage cables to fit through and then closes around them. You wind up with a beautiful, professional-looking wall plate with the cables looking as if the plate was built to hold them - and no gaps or spaces anywhere. It won’t detract from the look of your room and there’s no way that cold or hot air (or, although we hate to even mention it, unwelcome little crawly friends) can get through. The plate even has mounting wings molded into its construction, for easy and secure attachment to the back of the drywall. You don’t need mounting plates, o-rings, gaskets or any other parts; they cable plate is simple to install with just two screws. These plates are white in color, but we also sell them in black, ivory and almond. They have a low profile design, so they’ll fit on any wall without standing out and can fit behind virtually any HDTVs or TV mounts easily. Whether you’re feeding a number of low-voltage inputs from components located throughout the room, or feeding speaker cables out from your audio amplifier to speakers in all corners of the space, this plate lets you run cables through the wall and take care of the “messy cable†issue in an elegant way. Checking out the important specifications of the Cmple one-gang cable plate with flexible opening: Low-profile design fits behind the industry’s thinnest mounts and TV's Conceals multiple low-voltage cables behind your flat panel TV: One gang plate, holds up to six cables Color: white Quick and easy installation, no additional parts necessary Mounting wings molded into the plate and fasten tightly against the back of the drywall Center portion of cable plate made of flexible plastic allowing multiple cables to pass through the plate No low voltage mounting plate or o-ring required It’s unlikely that anyone will even notice your Cmple flexible opening cable plates since they’re designed to blend into their surroundings. If someone does notice, though, they’ll probably tell you that they’ve never seen anything like them before - and that they’re very cool. Remember who told you that first.
HDMI Wall Plate with Composite Video 3-RCA Our HDMI with 3-RCA outlet single gang female HDMI/RCA wall plate offers a beautiful in-wall HDMI/RCA digital video outlet to easily connect all your high speed HDMI devices.With the 19-pin HDMI wall plate you can provide a clean, professional video installation. Our Single Outlet Female High Speed HDMI Wall Plate can be paired with the Cmple HDMI cables, or any of our High Speed HDMI cables.Make a perfect connection between any HDMI device and your HDMI equipped projector or remote display. Features and Specifications: Single-Gang Wall Plate Supports 1 HDMI input 3 RCA/WYR inputs Supports HDMI 1.4b HDCP 1.4 Supports 10.2 Gbps Video Bandwidth Simple Plug And Play Installation Gold-plated HDMI and three color-coded (yellow, white, red) RCA female connectors Fits into a standard single-gang junction box or p-ring Attractive Decora-style wall plate Color: White A good-looking home theater installation should be neat, sleek and versatile. Allowing for easy connections to in-wall cabling, manufactured to look beautiful and modern, and permitting simultaneous connections to both HDMI and component video cables. Our Cmple single-gang wall plate with attached jacks checks off all of those boxes at an impressively-low price.
Cable Management Kit - White Each raceway in this cable management kit is a hinged plastic enclosure, that latches on one side, making it easy to open to insert, remove, or manage installed cables. When closed, the raceway measures 11/16inch between the latch lip and the edge of the hinged side. Vertically, it is 1/4inch at the edge and 3/8inch at the top of the dome. Under the latch lip, there is a space about 3/16inch x 3/16inch. The raceways and connectors are white plastic and can be painted to match your walls or decor. Each raceway has adhesive foam tape attached to the back side for easy installation onto a clean, dry surface, including slightly uneven surfaces. The raceways can be easily cut down to shorter lengths using a hacksaw. The kit includes four long (30inch) and four short (9.25inch) raceways, plus a variety of connection covers to fit almost any circumstance. Additional connection covers are available separately. Included in the Package: 4x MP-CMP01 30inch cable raceway 4x MP-CMP02 9 1/4inch cable raceway 1x MP-CMP03 inchTinch connection cover 2x MP-CMP04 inchLinch connection cover 3x MP-CMP05 straight connection cover 1x MP-CMP06 outer corner connection cover 1x MP-CMP07 inner corner connection cover
1 Port Keystone Jack Surface Mount Box - White These keystone jack surface mount boxes are ideal for spaces where a face plate just wont fit. It also is great for places where punching a hole in the wall not possible. The compact design of these quality mount boxes make it not only easy to install but also space saving. Additionally, the universal shape allows most compatible keystone inserts. Each individually packaged mount box comes with it's own screws for mounting, two-sided padded adhesive tape for hard or delicate surfaces, and a cable tie to help position the cable. It even has a space for personalized labeling of your ports. This mount box makes it convenient for anyone who wishes to organize their keystones in an efficient and professional manner. FEATURES: Number of Ports: 1 Easy open and close snap cover White Color Easy to use and install Keystone Jacks NOT INCLUDED Includes screws, padded dual sided tape and cable tie UL Listed Certified
1 Gang Recessed Dual Power Outlet, UL Listed This product has a minimalist design that is sleek and unnoticeable. Perfect for remodeling or new construction projects, this power outlet creates 1 inch of extra room to connect to your devices. It comes with a built-in wall plate and works great behind flat screen displays. Features: 125V 15Amp Self-grounding UL-Listed Color: White Dimensions: 4.5/8in x 2.7/8in x 2in, 1in recessed area
Wire Trak Outside Corner for Raceway PVC White, 3/4inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
Wire Trak Outside Corner for Raceway PVC White, 1inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
Wire Trak Outside Corner for Raceway PVC White, 1 1/2inch W x 3/4inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
Wire Trak Outside Corner Fitting FMOC1150W - White Functional, Affordable, Attractive solutions for wire enclosure applications in commercial, industrial, and residential environments. Parts are made of strong, durable, lightweight, UL 94-VO Compliant PVC. One inch minimum bend radius accessories available for Category 5e, 6 and fiber optic installations. Custom colors upon request All Products are paintable Features: Excellent for electrical and communications wiring Flange suitably punched for mechanical fastening Parts made from a UL VO -94 compliant PVC
Wire Trak Joint Cover for Raceway PVC White, 3/4inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Color: white
Wire Trak Joint Cover H for Raceway PVC White, 1inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Color: white
Wire Trak Inside Corner for Raceway PVC White, 1 1/2inch W x 3/4inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Color: white
Wire Trak Flat Elbowr for Raceway PVC White, 1 1/2inch W x 3/4inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
Wire Trak Flat Elbow for Raceway PVC White, 1inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
Wire Trak End Cap for Raceway PVC,White, 3/4inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Color: white
Wire Trak End Cap for Raceway PVC White, 1inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Color: white
Wire Trak End Cap for Raceway PVC White, 1 1/2inch W x 3/4inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Color: white
Wire Trak 3 Way Tee for Raceway PVC White, 3/4inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
Wire Trak 3 Way Tee for Raceway PVC White, 1 1/2inch W x 3/4inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
Wire Trak 3 Way Tee for Raceway PVC White, 1inch W x 1/2inch H Features: Constructed of UL94VO Flame Retardant PVC Built with UV Stabilizer to prevent color fading Latex paintable surface Category 5 Bend Radius Compliant Color: white
Wire Trak 1-Piece Latching Raceway PVC White - 3/4inch W x 1/2inch H x 72inch L - 6FT The Latching Duct Raceway System is an economical alternative to many two-piece solutions. It is designed with a flexible living hinge allowing for multiple adds/moves/changes as your wiring requirements change. This Latching Duct system is compatible with the accessory components of the two-piece System. It comes complete with a solvent based curing adhesive foam tape on the back for secure adhesion to the wall. It is easy to install, and it eliminates the need to stock both channel and cover lids as required by most two-piece systems. Features: Economical One-Piece Latching System Compatible with WireHider Accessories Constructed of UL94V0 Flame Retardant PVC Built with UV Stabilizer to Prevent Color Fading Latex Paintable PVC Surface Adhesive Foam Tape for Fast & Easy Installation Duct Cutting Tool (Sold separately)
Wire Track Inside Corner Fitting FMIN1150W - White Functional, Affordable, Attractive solutions for wire enclosure applications in commercial, industrial, and residential environments. Parts are made of strong, durable, lightweight, UL 94-VO Compliant PVC. One inch minimum bend radius accessories available for Category 5e, 6 and fiber optic installations. Custom colors upon request All Products are paintable Features: Excellent for electrical and communications wiring Flange suitably punched for mechanical fastening Parts made from a UL VO -94 compliant PVC
Wire Track Corner Tee Reducer 1150 to 500, FMTR1150500W - White Functional, Affordable, Attractive solutions for wire enclosure applications in commercial, industrial, and residential environments. Parts are made of strong, durable, lightweight, UL 94-VO Compliant PVC. One inch minimum bend radius accessories available for Category 5e, 6 and fiber optic installations. Custom colors upon request All Products are paintable Features: Excellent for electrical and communications wiring Flange suitably punched for mechanical fastening Parts made from a UL VO -94 compliant PVC
Wire Track Corner Tee Reducer 1150 to 375, FMTR1150375W - White Functional, Affordable, Attractive solutions for wire enclosure applications in commercial, industrial, and residential environments. Parts are made of strong, durable, lightweight, UL 94-VO Compliant PVC. One inch minimum bend radius accessories available for Category 5e, 6 and fiber optic installations. Custom colors upon request All Products are paintable Features: Excellent for electrical and communications wiring Flange suitably punched for mechanical fastening Parts made from a UL VO -94 compliant PVC
Wire Track Corner Tee Reducer 1150 to 21125, FMTR11501125W - White Functional, Affordable, Attractive solutions for wire enclosure applications in commercial, industrial, and residential environments. Parts are made of strong, durable, lightweight, UL 94-VO Compliant PVC. One inch minimum bend radius accessories available for Category 5e, 6 and fiber optic installations. Custom colors upon request All Products are paintable Features: Excellent for electrical and communications wiring Flange suitably punched for mechanical fastening Parts made from a UL VO -94 compliant PVC
Three-Gang White Decoro Wall Plate Decorator-Style Flush Wall Plates Smooth Finish High-Impact ABS Plastic Includes color-matched mounting screws UL Listed Ideal for switches and receptacles
Single-Gang White Decoro Wall Plate Decorator-Style Flush Wall Plates Smooth Finish High-Impact ABS Plastic Includes color-matched mounting screws UL Listed Ideal for switches and receptacles
White Decorator Style Keystone Insert - 4 Port White Decorator Style Keystone Inserts - 4 Port, Convert any decorator wall plate to modular Keystone outlets, Ultra flexible white PVC plastic, UL listed, Includes matching mounting screws. Convert any decorator wall plate to modular Keystone outlets Ultra flexible white PVC plastic UL listed Includes matching mounting screws
